Goldstar DHA4012DL, DHA5012DL Disassembly Instructions, Mechanical Parts, Bucket and AIR Filter

3. DISASSEMBLY INSTRUCTIONS

3.1 MECHANICAL PARTS

3.1.1 BUCKET AND AIR FILTER

1.Disconnect the power supply.

2.Turn the Humidity Control off.

3. Remove the bucket. (See Figure 5)

4. Flex the filter at the lower right corner and take it off. (See Figure 5)

2

1

Figure 5

3.1.2 FRONT GRILLE

1.Remove 2 screws which fasten the front grille.

2.By pushing the both sides of front grille, pull the front grille forward and upward. (See Figure 6)

3.1.3. CABINET AND CONTROL BOX

1.Remove the Bucket, the Air filter and Front grille according to the procedure above.

2.Remove 3 screws that fasten Control box. (See Figure 7)

3.Remove 9 screws on all sides of the cabinet.

4.Lift the Cabinet from the base.(See Figure 8)

5.Remove a screw fasten the earth wire on the front of control box.

6.Unhook control box from two hooks on the shroud. (See Figure 8)

Push

Push

Figure 6

Figure 7 Figure 8

— 10—