Fedders Portable Dehumidifier Operation, Before starting this unit, Operating Instructions

Page 7

Operation

Before starting this unit

1.Select a suitable location, making sure you have a level surface with no obstructions, and easy access to an electrical outlet.

2.Install the window adapter kit, as described in the Installation section.

Note: The window adapter kit is required only while using the Cool mode. 3. Plug the unit into a grounded electrical outlet. Do not use an extension cord.

Operating Instructions

Air Conditioner /Cool Mode

1.Install the widow adapter kit and hoses to the unit.

2.Press the On/Off button to turn the unit on. The unit will power up and display the room temperature.

3.Press the Mode button until the green indicator light shines.

4.Press the Temp/Timer Set buttons to set the desired temperature. While you are adjusting the setting, the Set Temperature indicator will shine and the display will show the set temperature. After you have finished adjusting the temperature, the display will default back to the room temperature and the “Room Temp” indicator will shine.

5.Press the Fan Speed button to select the desired setting (High, Med, Low). The fan speed indicator light will shine for the selected speed.

6.Condensed water may accumulate in the unit. If the internal tank becomes full, the warning light will shine and the unit will not operate until the unit has been drained. See Draining Excess Water section for instructions on how to drain the water.

7.Once the room reaches the set temperature, the compressor will turn off and the fan will continue to operate.

Dehumidify Mode

1.Press the On/Off button to turn the unit on. The unit will power up and display the room temperature.

2.Press the Mode button until the orange indicator light shines above the word Dehumidify.

3.Condensed water may accumulate in the unit. If the internal tank becomes full, the warning light will shine and the unit will not operate until the unit has been drained. See Draining Excess Water section.

4.The fan will operate in Med speed. Fan speed is not adjustable in Dehumidify mode.

Fan Mode

1.Press the On/Off button to turn the unit on. The unit will power up and display the room temperature.

2.Press the Mode button until the yellow indicator light shines.

3.Press the Fan Speed button to select the desired setting (High, Med, Low). The fan speed indicator light will shine for the selected speed.

4.The unit will operate continuously in Fan mode.

Timer

The timer can be set to turn the unit off or on. The timer is adjustable between 1 and 12 hours.

To turn unit off automatically:

1.With unit running in desired mode, press timer button.

2.Use Temp/Timer Set buttons to select number of hours you would like the unit to run until it automatically shuts off. After you have finished adjusting the timer, the display will default back to the room temperature and the “Room Temp” indicator will shine. Timer indicator will blink when set. To turn timer off press the timer button.

To turn unit on automatically:

1.With unit powered on select desired mode and fan speed, then power unit off.

2.With machine powered off, press timer button to select number of hours until you would like the unit to automatically start running in air conditioning mode. Timer indicator will blink when set. The display will show the number of hours the unit is set until it begins operation. To turn timer off press the timer button.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Climatiseur autonome Déshumidificateur InstallationRoom Air Conditioner Dehumidifier Acondicionador de Aire DeshumidificadorImportant safety instructions Before you start IntroductionDescription of Parts on Portable Cooling UnitWindow adapter kit Window adapter kitInstructions for assembling the window adapter kit Installing the window adapter kit Window installationAttaching the air exchange tubes to the air conditioner Control Panel Before starting this unit OperationOperating Instructions Cleaning the filter MaintenanceCleaning and Maintenance Air Conditioner Remote ControlHow to obtain Warranty Service or Parts Service & warrantyInstrucciones importantes de seguridad Antes de comenzar Juego de adaptador de ventana Juego de adaptador de ventanaInstrucciones de montaje del juego de adaptador de ventana Instalación del juego de adaptador de Ventana Instalación en la ventanaPanel de control Antes de encender el acondicionador de aire FuncionamientoInstrucciones de funcionamiento Control remoto del acondicionador de aire MantenimientoLimpieza y mantenimiento Drenaje del exceso de aguaCómo obtener piezas o servicio bajo garantía Servicio y garantíaDirectives de sécurité importantes Avant de commencer Description des pièces du climatiseur mobileProlongateur Ensemble adaptateur pour fenêtre Ensemble adaptateur pour fenêtreInstallation de l’ensemble adaptateur pour Fenêtre Installation fenêtreFixation des tubes d’échange d’air au Climatiseur Tableau de commande Avant de mettre cet appareil en marche UtilisationInstructions dutilisation Nettoyage du filtre à air Télécommande du climatiseurEntretien Nettoyage et entretienDate de la preuve d’achat Service après-vente et garantiePage Page Instructions pour le service après-vente Service InstructionsInstrucciones de servicio

Portable Dehumidifier specifications

The Fedders Portable Dehumidifier is an essential appliance designed to enhance indoor air quality by efficiently removing excess moisture, thus preventing the growth of mold and mildew. This unit is particularly beneficial for areas prone to high humidity, such as basements, bathrooms, and laundry rooms.

One of the main features of the Fedders Portable Dehumidifier is its capacity to remove up to 30 pints of moisture from the air per day. This makes it ideal for small to medium-sized rooms, ensuring the space remains comfortable and healthy. The dehumidifier operates quietly, allowing it to function unobtrusively in living spaces, while its sleek and compact design ensures it can be easily moved from one room to another as needed.

In terms of technology, the Fedders Portable Dehumidifier utilizes advanced refrigerant-based dehumidification. This technology cools the air, allowing moisture to condensate on the coils, which is then collected in a water tank or drained continuously via a hose. This method is highly effective, ensuring consistent performance in maintaining optimal humidity levels.

The unit features an adjustable humidistat, giving users control over the desired humidity level within their space. Once the set humidity level is achieved, the dehumidifier automatically shuts off, which not only conserves energy but also prolongs the life of the appliance. Additionally, it has a convenient continuous drain option, allowing for hassle-free operation without the need to frequently empty the water tank.

Other notable characteristics of the Fedders Portable Dehumidifier include its user-friendly controls and an LED display that provides real-time information about the current humidity level. The removable and washable filter ensures that clean air is cycled back into the room, enhancing air quality while also making maintenance simple and straightforward.

In summary, the Fedders Portable Dehumidifier combines efficiency, convenience, and advanced technology, making it an excellent choice for homeowners seeking to combat excessive humidity indoors. Its powerful moisture removal capabilities, user-friendly features, and portable design make it a top contender in the market for dehumidifying solutions.
Top Page Image Contents