Do not use an adapter plug with this appliance

iMPORTANTSAFETYINFORMATION. READALL iNSTRUCTiONSBEFOREUSING.

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury.

SAFETYPRECAUTIONS

When using this dehumidifier, always follow basic safety precautions, including the following:

[] Use this appliance only for its intended purpose as described in this Owner's Manual.

[] This dehumidifier must be properly installed

and grounded as described

in this manual before it is used.

[] Never operate this dehumidifier in an area that is likely to accumulate standing water. If this condition develops, for your safety

disconnect the power supply before stepping into the water.

[] Never unplug your dehumidifier by pulling on the power cord. Always grip plug firmly and pull straight out from the receptacle.

[] Replace immediately all electric service cords that have become frayed or otherwise damaged. A damaged power supply cord

must be replaced with a new power supply cord obtained from the manufacturer and not

repaired. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

[] If the receptacle does not match the plug, the receptacle must be changed out by a qualified electrician

[] Turn the dehumidifier OFFand unplug it before cleaning.

[] GE does not support any servicing of the dehumidifier. We strongly recommend that you do not attempt to service the dehumidifier yourself.

[] For your safety, do not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

[] All dehumidifiers contain refrigerants, which under federal law must be removed prior to product disposal. If you are getting rid of an old product with refrigerants, check with the company handling disposal about what to

do.

Do not use outdoors.

[]

[] This dehumidifier is intended for

indoor residential applications only. This dehumidifier should not be used

for commercial or industrial applications.

[] These R410A Dehumidifier Systems require contractors and technicians to use tools, equipment and safety standards approved for use with this refrigerant. DO NOT use equipment certified for R22 refrigerant only.

HOWTOCONNECTELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

For personal safety, this appliance must be properly grounded.

DO NOT use an adapter plug with this appliance.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric

shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a 2-prong wall outlet is encountered,

it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The dehumidifier should always be plugged into its own individual electrical outlet, which has a voltage rating matching the rating plate.

This provides the best performance and also

prevents overloading house wiring circuits, which could cause a fire hazard from overheated wires.

ADERSO, ADEHSO specifications

GE ADEHSO (Advanced Electrical High-Density Switching Optimization) and ADERSO (Advanced Distributed Energy Resource Switching Optimization) are cutting-edge technologies developed by General Electric to address the evolving challenges in energy management and distribution. These systems are specifically designed to enhance the efficiency, reliability, and performance of electrical grids, particularly in a landscape where renewable energy and distributed generation sources are becoming more prevalent.

One of the main features of GE ADEHSO is its ability to optimize the switching operations in high-density electrical networks. It utilizes advanced algorithms and machine learning techniques to analyze real-time load conditions, allowing for dynamic reconfiguration of the network. This capability not only enhances the resilience of the grid but also minimizes downtime and enhances service reliability, thereby reducing operational costs for utilities.

ADERSO complements ADEHSO by focusing on distributed energy resources (DERs). With the increasing integration of solar panels, wind turbines, and battery storage systems, the need for sophisticated management of these resources has never been more critical. ADERSO provides a comprehensive framework for coordinating and optimizing DERs to ensure that they are utilized effectively while maintaining grid stability. It facilitates peer-to-peer energy trading and enhances demand response initiatives, contributing to a greener energy landscape.

Both ADEHSO and ADERSO utilize the Internet of Things (IoT) technologies to create smart grid systems. By leveraging IoT sensors and devices, these systems can gather and process data from various sources, providing utilities with unprecedented insights into grid operations. This data-driven approach allows for proactive maintenance and quicker response to potential outages or system failures.

In terms of characteristics, GE ADEHSO and ADERSO are designed to be scalable and adaptable. They can be integrated into existing grid infrastructures without significant overhauls, making them suitable for a wide range of applications—from urban centers to remote areas. Furthermore, their user-friendly interfaces allow operators to easily interact with the systems, facilitating intuitive management of complex energy networks.

In summary, GE ADEHSO and ADERSO represent a significant advancement in energy distribution and management technologies. By enhancing switching operations and optimizing the integration of distributed energy resources, these systems not only improve grid reliability but also play a crucial role in advancing the global transition towards sustainable energy sources.