CDA HCG301 manual Repairs, Feeder Cable Section

Page 19

A

Fig. 8.1

F

Fig. 8.2

REPAIRS

REPLACING THE POWER SUPPLY CABLE

(for 2 electrical plates and vitroceramic models)

Turn the cooktop over and unhook the terminal board cover by inserting a screwdriver into the two hooks “A” (fig. 8.1).

Open the cable gland by unscrewing screw “F” (fig. 8.2), unscrew the terminal screws and remove the cable.

The new supply cable, of suitable type and section, is connected to the terminal board following the diagram fig. 8.3.

REPLACING THE POWER SUPPLY CABLE (for gas models)

-The supply cable must be replaced with a cable of the same type.

-The electrical cable must be connected to the terminal board following the diagrams of fig. 8.4.

FEEDER CABLE SECTION

COOKING HOB GAS

type “H05V2V2-F”

resistance to temperatures of 90°C

230 V~

3 x 0,75 mm2

230 V




L1				N (L 2)

PE

Fig. 8.3

230 V

L N

Fig. 8.4

COOKING HOB ELECTRIC HOTPLATES

The external diameter of the supply cable must not be more than 9 mm.

tipo “H05RR-F”

230 V~

3 x 1,50 mm2

COOKING HOB VITROCERAMIC

The external diameter of the supply cable must not be more than 9 mm.

type “H05RR-F”

230 V~

3 x 1,50 mm2

38

Image 19

Contents HCG301 Domino Two Burner Gas Hobs Declaration of CE Conformity Important Precautions and RecommendationsEnglish Tips for the UserGAS Cooking HOB Fig 1FEATURESGAS triple ring burner Cooking HOB Fig Electric Cooking HOB Fig Valveless Electric SPARK-LIGHTING GAS Burners Lighting GAS Burners Fitted with Safety Valve DeviceGAS Cooking Hobs GAS BurnersGrate for Small Pans optional See fig Choice of Burner figSpecial WOK Grille optional .6 e Proper USE of the Electric Hotplate fig Electric Cooking HobsNormal Hotplate Rapid Hotplate red dotHi-light radiant zones Fig Vitroceramic HobsTypes of Cooking Area Circuiti radiant zones FigHints for Safe USE of the Hobs Type of cookingCleaning and Maintenance Burners and Grids Correct Replacement of the BurnersTriple Ring Burner Technical Information for the Installer 6INSTALLATIONGAS Cooking Hobs Discharging Products of Combustion With Cupboard Doors figFastening the Cooktop fig Choosing Suitable Surroundings for gas modelsElectrical Plates and Vitroceramic Cooking Hobs Fastening the Cooktop GAS Connections GAS SectionGases Regulating the Burner Minimum Setting Operations to be Performed When Substituting the InjectorsLubricating the GAS Taps Details Electrical SectionFeeder Cable Section RepairsSecção DOS Cabos DE Alimentação Parte EléctricaLigação À Rede Eléctrica ReparaçõesCod