CDA HCG301 manual Fastening the Cooktop

Page 15

A

A

A

A

Fig. 6.10

C		D
B		mm min.	mm max.
	A	20	40
	A
Fig. 6.11

C	D
B	30 mm min.	40 mm max.
B	A
Fig. 6.12

FASTENING THE COOKTOP

Each cooker top is provided with an installation kit including brackets and screws for fastening the top to fixture panels from 20-30 to 40 mm thick, figs. 6.11 (2 electrical plates hob) e 6.12 (vitroceramic hob).

✓Cut the unit.

✓Stretch gasket “D” over the edge of the hole made, being careful to overlay the junc- tion edges

✓Turn the cooktop over and put tabs “A” (fig. 6.10) into the mountings, only tighten screws “B” a few turns.

Make sure that the tabs are mounted correctly as shown in the figures 6.11 and 6.12. Turn the tabs so that the cooktop can be put into the hole.

✓Put the cooktop into the hole cut into the unit and position it correctly.

✓Put tabs “A”; into place, tooth “C” of the tabs should go into the hole.

✓Tighten screws “B” until the cooktop is completely secured.

✓Using a sharp tool cut off the part of gasket “D” which protrudes from the cooktop.

34

Image 15

Contents HCG301 Domino Two Burner Gas Hobs Declaration of CE Conformity Important Precautions and RecommendationsEnglish Tips for the User1FEATURES GAS Cooking HOB FigGAS triple ring burner Cooking HOB Fig Electric Cooking HOB Fig Valveless Electric SPARK-LIGHTING GAS Burners Lighting GAS Burners Fitted with Safety Valve DeviceGAS Cooking Hobs GAS BurnersChoice of Burner fig Grate for Small Pans optional See figSpecial WOK Grille optional .6 e Proper USE of the Electric Hotplate fig Electric Cooking HobsNormal Hotplate Rapid Hotplate red dotHi-light radiant zones Fig Vitroceramic HobsTypes of Cooking Area Circuiti radiant zones FigHints for Safe USE of the Hobs Type of cookingCleaning and Maintenance Correct Replacement of the Burners Burners and GridsTriple Ring Burner 6INSTALLATION Technical Information for the InstallerGAS Cooking Hobs Discharging Products of Combustion With Cupboard Doors figFastening the Cooktop fig Choosing Suitable Surroundings for gas modelsElectrical Plates and Vitroceramic Cooking Hobs Fastening the Cooktop GAS Section GAS ConnectionsGases Operations to be Performed When Substituting the Injectors Regulating the Burner Minimum SettingLubricating the GAS Taps Details Electrical SectionFeeder Cable Section RepairsSecção DOS Cabos DE Alimentação Parte EléctricaLigação À Rede Eléctrica ReparaçõesCod