,,1752'8&7,21
352'8&7'(6&5,37,21
Model FCX oil fired boiler utilizes a sealed combus- tion system that operates at a temperature at which the flue products will condense. The flue products temperature is so low that the unit is suitable for use with PVC / Polypropylene flue pipes, which are offe- red as standard options for installation. Model FCX is approved for installation with zero clearance to combustible materials by Intertek Testing Services to the UL Standard for Oil Fired Storage Tank Water Heaters (UL 732).
Model FCX is completely assembled and provides standard parts as follows:
•An enameled steel cabinet with thick insulation
•A completely unitized, thick shelled boiler with combustion chamber and a heat exchanger with a system of removable baffles
•A stainless steel condenser, with condensate drain
•A high efficiency, low emission, gun type oil burner with combustion air fan, integral oil pump, oil heater and primary control
•A control panel assembly and all electrical con- trols for operation of the boiler, including a wa- ter temperature thermometer in circuit 1
•A manual
•A safety pressure relief valve
•An expansion tank
•A water circulating pump
•Complete internal water piping terminating in connections for two independent
•Complete internal air piping terminating in a connection to a coaxial flue/combustion air in- take system.
Standard options include:
•Coaxial balanced flue system components for connection to the boiler to provide venting of the flue products and combustion air intake.
|
|
|
| 2.20 | 34.6 |
|
| 2.28 | 5.98 | 5.55 | |
|
| 2.20 | |||
|
|
|
|
| |
39.1 | 34.4 | 34.0 |
|
| 34.4 |
|
|
|
|
| 17.7 |
|
|
|
|
| 8.94 |
| 23.7 | 27.5 |
|
|
|
| Front view | Side view |
| Rear view |
|
|
|
|
|
|