Lochinvar WH 55 - 399 manual Information

Page 14

User’s Information Manual

4 SMART SYSTEM control module

Status Display Screens (cont’d)

Section

Display

Description

 

SYSTEM:

The temperature read by the system supply sensor (if connected).

 

 

 

 

TANK:

The temperature read by the tank sensor (if connected).

 

 

 

 

OUTDOOR:

The temperature read by the outdoor sensor (if connected).

 

 

 

 

INLET TEMP:

The temperature read at the inlet to the heat exchanger.

 

 

 

 

OUTLET TEMP:

The temperature read at the outlet of the heat exchanger.

 

 

 

 

DELTA T:

The temperature difference between the inlet and the outlet of the

 

heat exchanger.

 

 

 

 

 

 

FLUE TEMP:

The temperature read by the flue sensor.

 

 

 

 

FLAME CURRENT:

The current measured by the flame sense circuit.

 

 

 

 

FAN SPEED:

The speed of the combustion blower.

C

 

 

BOILER PUMP:

The status of the boiler pump output.

(Operational

 

 

SYSTEM PUMP:

The status of the system pump output.

Information)

 

 

DHW PUMP:

The status of the DHW pump output.

 

 

 

 

 

BMS VOLTAGE:

The voltage received from a BMS system.

 

 

 

 

BLR PUMP OUTPUT:

The speed signal sent to a variable speed boiler pump in percent.

 

 

 

 

SYS PUMP INPUT:

The speed signal received from a variable speed system pump control.

 

 

 

 

RATE OUTPUT:

A 0 - 10V signal indicating the firing rate of the boiler.

 

 

 

 

SH RUN HOURS:

The total hours of operation in the Space Heating Mode.

 

 

 

 

SH CYCLES:

The total burner cycles in the Space Heating Mode.

 

 

 

 

DHW RUN HOURS:

The total hours of operation in the DHW Mode.

 

 

 

 

DHW CYCLES:

The total burner cycles in the DHW Mode.

 

 

 

 

LAST 10 FAULTS NO:*

The last 10 lockouts.

 

 

 

 

MENU

Press and hold the LEFT SELECT key for 5 seconds to enter the Menu

 

Screen.

 

 

 

 

 

 

EXIT

Press the LEFT SELECT key to exit the current screen or setting.

D

 

 

YES

Press the LEFT SELECT key to confirm that the boiler needs to

(LEFT SELECT

shutdown.

 

key function)

LIMITS

Press the LEFT SELECT key to enter the screen that allows you to

 

adjust the limit settings.

 

 

 

 

 

 

HOME

Press the LEFT SELECT key to return to the Status Screen and upload

 

parameter changes.

 

 

 

 

 

14

Image 14
Contents User’s Information Manual Models WH 55 Contents Boiler service and maintenance Please read before proceedingAreas likely to have contaminants Prevent combustion air contaminationProducts to avoid See pages 6 8 for detailed instructions Maintenance schedule Service technicianOwner maintenance Maintenance schedule Inspect/check condensate lines and fittingsClean/Inspect Trap Assembly Condensate disposalTest low water cutoff if installed Operating instructions 1Operating Instructions Models 55Operating instructions User InstallerSmart System control module Time and dateSpace heating SH1, SH2, SH3 and tank set points Temperature UnitsNight Setback Override Call for Heat Information Right Select no