Assembly of Crown Concentric Venting | Crown Boiler M600 specs

C. Assembly of Crown Concentric Venting

WARNING

Failure to follow the instructions could result in ﬂue gas leakage into the combustion air or indoor air, resulting in unsafe or unreliable operation.

•Do not lubricate concentric gaskets with anything other than water.

•Do not attempt to cut any piping except as permitted in this section. When cutting these sections, make sure all cuts are square and allow for proper insertion.

•Do not attempt to try to mix this concentric pipe with other venting systems.

1)The components listed in Table 1.6 are required for 80/125mm and 100/150mm installations and are not supplied with the BWC150/225 boilers. Before starting assembly of the vent system, make sure that the planned installation is in accordance with the “Vent System Design” section of this manual and that all required vent components are on hand. These components are available through Crown distributors.

2)Cutting Straight Pipe - The following straight pipe sections may be cut:

80/125 Part #	100/150 Part #	Description

230517	230560	19 1/2” Straight
230515	230562	39” Straight

These sections have a plain male end (without beads - see Figure 1.9a). They are always cut from the male end. Sections not shown on the above list may not be cut. These sections have beads on the male end (Figure 1.9b).

To cut the straight sections listed above refer to Figure 1.10 and the following instructions:

FIGURE 1.9a: CUTTABLE STRAIGHT SECTION

FIGURE 1.9b: NON CUTTABLE STRAIGHT SECTION

M600 specifications

The Crown Boiler M600 is a prominent choice for residential and commercial heating needs, renowned for its efficiency, reliability, and advanced technologies. This boiler model is designed to deliver high-performance heating solutions while minimizing energy consumption and operational costs.

One of the standout features of the M600 is its impressive heating capacity, with the capability to output up to 600,000 BTUs. This substantial capacity makes it suitable for larger buildings or homes with significant heating demands, ensuring that spaces remain comfortably warm even in the coldest weather. The M600 is equipped with a robust cast iron heat exchanger, which is fundamental to its efficient heat transfer capabilities. This heat exchanger not only enhances performance but also extends the life of the boiler.

The Crown Boiler M600 employs a versatile design that accommodates both hot water and steam heating systems. This flexibility allows homeowners and building managers to choose the best system that aligns with their specific requirements. Additionally, the M600 features a power vent design, which facilitates the use of PVC venting materials, offering convenience and an array of installation options.

Another significant characteristic of the M600 is its user-friendly controls. The boiler is designed with a digital display that provides real-time status updates and diagnostics. This feature simplifies monitoring and managing system performance, enabling users to make necessary adjustments with ease. Moreover, the M600 is compatible with modern smart thermostats, further enhancing its energy efficiency and user-friendliness.

In terms of safety, the Crown Boiler M600 is equipped with multiple safety features, including a low water cut-off and high limit control. These safeguards ensure the boiler operates safely and effectively, reducing the risk of malfunctions and potential hazards.

Moreover, the M600 adheres to stringent efficiency standards, boasting an AFUE (Annual Fuel Utilization Efficiency) rating that meets or exceeds industry requirements. This ensures that users benefit from optimal fuel efficiency, translating into lower operational costs.

Overall, the Crown Boiler M600 stands out as a durable and efficient heating solution. With its high-output capacity, advanced technologies, user-friendly features, and safety measures, it is an excellent choice for those seeking reliable heating in larger residential or commercial spaces.