Crown Boiler M600 installation instructions Condensate Drain Line Assembly

Page 21

8)Condensate Drain Line - In systems where a concentric vent is used, all condensate which forms in the boiler or vent system collects in both the condensate vent adapter and the sump under the heat exchanger and leaves the boiler through the condensate trap. This trap allows condensate to drain from the boiler and vent while retaining flue gases. A length of corrugated drain hose is supplied with the boiler and is connected to the trap as shown in Figure 1.15. This hose may be routed through the back of the boiler or to the left side through the knockout provided. Route this hose to a drain or other suitable point for disposal. Note the following when disposing of the condensate:

a)If the condensate drain line must be extended, construct the extension from PVC or CPVC pipe. Insert the hose provided with the boiler into the end of the extension as shown in Figure 1.15.

b)Condensate is slightly acidic. Do not use metallic pipe or fittings in the condensate drain line. Do not route the drain line through areas that could be damaged by leaking condensate.

c)Some jurisdictions may require that the condensate be neutralized before being disposed of. Dispose of condensate in accordance with local codes.

d)Do not route, or terminate, the condensate drain line in areas subjected to freezing temperatures.

e)If the point of condensate disposal is above the trap, it will be necessary to use a condensate pump to move the condensate to the drain. In such cases, select a condensate pump that is approved for use with condensing furnaces. If overflow from this pump would result in property damage, select a pump with an overflow switch and use this switch to shut down the boiler. Alternatively, if heat is a necessity, use the overflow switch to trigger an alarm.

f)Do not attempt to move the trap from the location shown in Figure 1.15. Do not attempt to substitute another trap for the one provided with the boiler.

g)The vent shown in Figure 1.15 must be left open for the trap to work properly.

FIGURE 1.15: CONDENSATE DRAIN LINE ASSEMBLY

19

Page 20 Page 22
Image 21
Page 20 Page 22
Contents BWC Series Page Page Concentric Venting For BWC150 and BWC225 Page Summary of Horizontal Venting Options Horizontal Concentric Venting Vent Option 3,4 3c Positioning Vent Terminal Under Overhangs VENT/ AIR Intake Fitting Equivalent Length Vent Options 3,8 Concentric Vent Adapter Kit Installation Concentric Vent Adapter Assembly Assembly of Crown Concentric Venting 10 Cutting Straight Pipe 11a Joining Cuttable Pipe 12a Dimension L, Horizontal Terminal 12c Cutting Inner Pipe of Horizontal Terminal 13a Dimension H 13b Cutting Vertical Terminal Machine Screw 15 Condensate Drain Line Assembly PN 980241 Rev BWC 12/07

M600 specifications

The Crown Boiler M600 is a prominent choice for residential and commercial heating needs, renowned for its efficiency, reliability, and advanced technologies. This boiler model is designed to deliver high-performance heating solutions while minimizing energy consumption and operational costs.

One of the standout features of the M600 is its impressive heating capacity, with the capability to output up to 600,000 BTUs. This substantial capacity makes it suitable for larger buildings or homes with significant heating demands, ensuring that spaces remain comfortably warm even in the coldest weather. The M600 is equipped with a robust cast iron heat exchanger, which is fundamental to its efficient heat transfer capabilities. This heat exchanger not only enhances performance but also extends the life of the boiler.

The Crown Boiler M600 employs a versatile design that accommodates both hot water and steam heating systems. This flexibility allows homeowners and building managers to choose the best system that aligns with their specific requirements. Additionally, the M600 features a power vent design, which facilitates the use of PVC venting materials, offering convenience and an array of installation options.

Another significant characteristic of the M600 is its user-friendly controls. The boiler is designed with a digital display that provides real-time status updates and diagnostics. This feature simplifies monitoring and managing system performance, enabling users to make necessary adjustments with ease. Moreover, the M600 is compatible with modern smart thermostats, further enhancing its energy efficiency and user-friendliness.

In terms of safety, the Crown Boiler M600 is equipped with multiple safety features, including a low water cut-off and high limit control. These safeguards ensure the boiler operates safely and effectively, reducing the risk of malfunctions and potential hazards.

Moreover, the M600 adheres to stringent efficiency standards, boasting an AFUE (Annual Fuel Utilization Efficiency) rating that meets or exceeds industry requirements. This ensures that users benefit from optimal fuel efficiency, translating into lower operational costs.

Overall, the Crown Boiler M600 stands out as a durable and efficient heating solution. With its high-output capacity, advanced technologies, user-friendly features, and safety measures, it is an excellent choice for those seeking reliable heating in larger residential or commercial spaces.
Top Page Image Contents