Desa Tech SL30PT installation manual Connecting to GAS Supply, Installation Items Needed

Page 11

OWNER’S MANUAL

INSTALLATION

Continued

CONNECTING TO GAS

SUPPLY

WARNING: This appliance re- quires a 1/2" NPT (National Pipe Thread) inlet connection to the pressure regulator.

WARNING: A qualified service person must connect heater to gas supply. Follow all local codes.

CAUTION: Never connect heater directly to the propane/LP supply. This heater requires an ex- ternal regulator (not supplied). In- stall the external regulator between the heater and propane/LP supply.

Installation Items Needed

Before installing heater, make sure you have the items listed below.

•piping (check local codes)

•sealant (resistant to propane/LP gas)

•equipment shutoff valve *

•test gauge connection *

•sediment trap

•tee joint

•pipe wrench

*An CSA/AGA design-certified equip- ment shutoff valve with 1/8" NPT tap is an acceptable alternative to test gauge connec- tion. Purchase the optional CSA/AGA de- sign-certified equipment shutoff valve from your dealer. See Accessories, page 19.

From External

Regulator (11"

W.C.** to 14" W.C.

Pressure)

Sediment

Tee Joint

 

Pipe

 

Trap

 

 

Nipple

3" Minimum

 

Cap

 

 

Figure 19 - Gas Connection

 

The gas inlet connection for the stove heater is located on the lower right-hand side of the stove when viewed from the front of the unit. The gas connection can be made either through the bottom right side or through the lower back opening as illustrated in Figure

17.Make sure gas log heater is secured to the stove cavity assembly.

The installer must supply an external regu- lator. The external regulator will reduce incoming gas pressure. You must reduce incoming gas pressure to between 11 and 14 inches of water. If you do not reduce incom- ing gas pressure, heater regulator damage could occur. Install external regulator with the vent pointing down as shown in Figure

18.Pointing the vent down protects it from freezing rain or sleet.

Back Stove

Panel

Product

Back View

Identification

Label

 

Side View

Gas

Log

 

Front

Heater

of

 

Stove

Gas Inlet

Unit

Connection

 

Access

Figure 17 - Gas Regulator Location and Gas Line Access Into Stove Cabinet

CSA/AGA Design-Certified Equipment Shutoff Valve With

1/8" NPT Tap*

Approved Flexible Gas Hose (if allowed by local codes)

Gas

Regulator

WARNING: Never connect heater to private (non-utility) gas wells. This gas is commonly known as wellhead gas.

CAUTION: Use only new, black iron or steel pipe. Inter- nally-tinned copper tubing may be used in certain areas. Check your local codes. Use pipe of 1/2" diameter or greater to allow proper gas volume to heater. If pipe is too small, undue loss of pressure will occur.

Installation must include a equipment shutoff valve, union, and plugged 1/8" NPT tap. Locate NPT tap within reach for test gauge hook up. NPT tap must be upstream from heater (see Figure 19).

IMPORTANT: Install equipment shutoff valve in an accessible location. The equip- ment shutoff valve is for turning on or shutting off the gas to the appliance.

Apply pipe joint sealant lightly to male threads. This will prevent excess sealant from going into pipe. Excess sealant in pipe could result in clogged heater valves.

CAUTION: Use pipe joint seal- ant that is resistant to liquid pe- troleum (LP) gas.

External

Regulator

Propane/LP

Supply Tank

Vent Pointing Down

*Purchase the optional CSA/AGA design-certified equipment shutoff valve from your dealer. See Accessories, page 19.

**Minimum inlet pressure for purpose of input adjustment.

Figure 18 - External Regulator With Vent Pointing Down

Continued

104464

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents What to do if YOU Smell GAS OWNER’S Operation and Installation ManualVENT-FREE PROPANE/LP GAS Stove Heater Safety InformationOperation Product Identification Product FeaturesSafety Pilot Local CodesConfined and Unconfined Space AIR for Combustion and VentilationProviding Adequate Ventilation Unusually Tight ConstructionDetermining if You Have a Confined or Unconfined Space AIR for Combustion VentilationDetermining FRESH-AIR Flow for Heater Location Ventilation Air From Outdoors Ventilation AIRVentilation Air From Inside BuildingCombustibles Vent-Free Operation Only InstallationCheck GAS Type Clearances toRemoving Back Panel Stove Cavity AssemblyAttaching Stove Legs Washers to reattach back panel later Installing GAS LOG Heater Into StoveInstallation Items Needed Connecting to GAS SupplyChecking GAS Connections Pressure Testing Heater Gas ConnectionsPressure Testing Gas Supply Piping System To Turn OFF GAS To Appliance For Your Safety Read Before LightingOperating Heater Lighting InstructionsInspecting Burners SpecificationsService Hints Technical ServiceMain Burner Cleaning and MaintenanceCleaning Burner Injector Holder and Pilot AIR Inlet Hole LogsObserved Problem Possible Cause TroubleshootingMaintenance, Observed Problem Possible Cause RemedyTop Equipment Shutoff Valve GA5010 AccessoriesCleaning KIT CCK Parts CentralsSL30PT Illustrated Parts BreakdownKEY Part Description QTY Parts ListCisc Cisg Included In Hardware Kit International Warranty Information

SL30PT specifications

Desa Tech SL30PT is a cutting-edge product that combines durability, efficiency, and advanced technology to meet the needs of modern consumers. This innovative device is designed for versatility, making it an ideal choice for a wide range of applications, including industrial, commercial, and residential use.

One of the standout features of the SL30PT is its robust construction. Built with high-quality materials, the device is engineered to withstand demanding environments, ensuring longevity and reliability. Its rugged design makes it resistant to impacts, moisture, and varying temperatures, allowing users to deploy it in diverse settings without worrying about performance degradation.

The SL30PT incorporates advanced technology to enhance its functionality. It features an intuitive user interface that simplifies operation, making it accessible for both seasoned professionals and those new to the technology. The device offers seamless connectivity options, including Wi-Fi and Bluetooth, enabling users to integrate it easily with other smart devices and systems. This connectivity allows for remote monitoring and control, further enhancing its utility in various environments.

Another key characteristic of the SL30PT is its energy efficiency. The device has been designed to minimize energy consumption while maintaining optimal performance, making it an environmentally friendly choice. This focus on sustainability not only reduces operating costs for users but also aligns with the growing demand for eco-conscious products.

Performance-wise, the SL30PT boasts impressive power and speed, ensuring that it can handle a wide range of tasks efficiently. The device is equipped with advanced processing capabilities that enable it to execute complex functions quickly, thereby improving productivity. Additionally, the SL30PT is compatible with various accessories and attachments, which can further expand its functionality and cater to specific user needs.

Furthermore, the device is backed by a comprehensive support system, including detailed user manuals and responsive customer service. This commitment to customer satisfaction ensures that users can maximize the benefits of the SL30PT while receiving assistance whenever needed.

In summary, Desa Tech SL30PT stands out as a versatile, durable, and technologically advanced device. Its robust construction, energy efficiency, and advanced connectivity options make it suitable for various applications, making it a valuable investment for users seeking reliable and innovative solutions.
Top Page Image Contents