Desa CRN30 installation manual Local Codes, Unpacking, Product Features

Page 4

SAFETY INFORMATION

Continued

5.Always run heater with plaque control knob at the 1, 2, 3 or 4 locked positions. Never set control knob between locked positions. Poor combustion and higher levels of carbon monoxide may result.

6.This heater needs fresh, outside air ventilation to run properly. This heater has an Oxygen Depletion Sensing (ODS) safety shutoff system. The ODS shuts down the heater if not enough fresh air is available. See Air for Combustion and Ventilation, page 5.

7.Keep all air openings in front and bottom of heater clear and free of debris. This will insure enough air for proper combustion.

8.If heater shuts off, do not relight until you provide fresh, outside air. If heater keeps shutting off, have it serviced.

9.Do not run heater

•where flammable liquids or vapors are used or stored

•under dusty conditions

10.Do not use heater if any part has been under water. Immediately call a qualified service technician to inspect the room heater and to replace any part of the control system and any gas control which has been under water.

11.Turn off and unplug heater and let cool before servicing. Only a qualified service person should service and repair heater.

12.Operating heater above elevations of 4,500 feet could cause pilot outage.

13.To prevent performance problems, do not use propane/LP fuel tank of less than 100 lbs. capacity.

14.Before using furniture polish, wax, carpet cleaner or similar products, turn heater off. If heated, the vapors from these products may create a white powder residue within burner box or on adjacent walls or furniture.

15.Provide adequate clearances around air openings.

LOCAL CODES

Install and use heater with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel Gas Code, ANSI Z223.1/NFPA 54*.

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

 

PRODUCT

IDENTIFICATION

Heater

Control Knob & Ignitor Button

Cabinet

(not seen from this view)

Grill

Guard

Plaque

Front

Panel

Figure 1 - Vent-Free Gas Heater

UNPACKING

1.Remove heater from carton.

2.Remove all protective packaging applied to heater for shipment.

3.Check heater for any shipping damage. If heater is damaged, promptly return to where you bought heater.

PRODUCT FEATURES

SAFETY DEVICE

This heater has a pilot with an Oxygen Deple- tion Sensing (ODS) safety shutoff system. The ODS/pilot is a required feature for vent-free room heaters. The ODS/pilot shuts off the heater if there is not enough fresh air.

IGNITION SYSTEM

This heater has either a piezo ignitor or electronic ignitor to light heater fuel supply.

THERMOSTATIC HEAT CONTROL

(Thermostat Models Only) Thermostat models have a thermostat sensing bulb and a control valve. This results in the great- est heater comfort. This can also result in lower gas bills.

4

www.desatech.com

107883-01H

Page 3 Page 5
Image 4
Page 3 Page 5
Contents CRP26, CRP26T, CRT26PT, CRN30, CRN30T, CRT30NT Model CRN30 ShownTable of Contents Safety Information Local Codes Product FeaturesUnpacking Providing Adequate Ventilation AIR for Combustion VentilationDetermining FRESH-AIR Flow for Heater Location Ventilation AIR Ventilation Air From Inside BuildingInstallation Installation ItemsCheck GAS Type Locating HeaterInstalling Heater to Wall Thermostat Sensing BulbThermostat Models Only Mounting BracketMethods For Attaching Mounting Bracket To Wall Marking Screw LocationsPlaque Heater Attaching To Wall Anchor MethodInstalling Bottom Mounting Screws Placing Heater On Mounting BracketConnecting to GAS Supply Mounting Base Feet to Floor Where required by local codeMounting Heater to Floor Mounting Base Feet to HeaterChecking GAS Connections Joint Nipple Sediment Trap From External RegulatorTest Pressures In Excess Of 1/2 Psig 3.5 kPa Test Pressures Equal To or Less Than 1/2 Psig 3.5 kPaOperating Heater NON-THERMOSTAT Models For Your Safety Read Before LightingLighting Instructions Manual Lighting Procedure Thermostat Models For Your Safety Read Before LightingTo Select Heating Level To Turn OFF GAS To ApplianceIgnitor Button Control Knob Control Knob CRP16T CRP26TInspecting Heater Thermostat OperationPilot Flame Pattern Burner Flame PatternService Hints Cleaning MaintenanceTechnical Service Troubleshooting Observed Problem Possible Cause RemedyODS/pilot lights but flame Gas leak. See Warning Specifications CRN18, CRN18T CRN30, CRN30T CRT30NTReplacement Parts AccessoriesService Publications Illustrated Parts Breakdown Cabinet Body ModelsParts List Cabinet Body Models CRT26PT and CRT30NT KEY Part Number CRT26PT CRT30NT Description QTY Burner Assembly Models CRP16, CRN18, CRP26 and CRN30 110803-02 Illustrated Parts Breakdown Parts Central Keep this Warranty Warranty InformationLimited Warranty VENT-FREE Infrared GAS Heaters

CRN30 specifications

Desa CRN30 is an innovative and versatile product designed to meet the growing demands of modern users seeking efficiency and reliability in their daily tasks. This advanced device, characterized by its cutting-edge features and robust technology, stands out in the market for both personal and professional use.

One of the main features of the Desa CRN30 is its powerful processing unit, which is engineered to handle multitasking with ease. Equipped with a high-performance chipset, it ensures smooth operation across various applications, making it ideal for users who demand speed and efficiency. The device also boasts ample memory and storage options, allowing users to seamlessly manage large files and run multiple applications simultaneously without any lag.

In terms of connectivity, the Desa CRN30 offers a range of options, including Bluetooth, Wi-Fi, and USB connections, ensuring that users can easily connect to a variety of devices and networks. This seamless connectivity allows for effortless data transfer and communication, enhancing productivity for both personal and professional tasks.

The durability of the Desa CRN30 is another significant characteristic. Constructed with high-quality materials, the device is designed to withstand rigorous use while maintaining a sleek and sophisticated appearance. Its lightweight design adds to its portability, making it easy for users to carry it wherever they go, whether to meetings, on commutes, or while traveling.

User experience is enhanced through an intuitive interface that provides easy navigation. The device features a vibrant display that ensures clear visibility in various lighting conditions, further elevating the user experience. Additionally, the Desa CRN30 is compatible with a range of applications, providing users with the flexibility to customize their device according to their specific needs.

Security is also a prime consideration in the design of the Desa CRN30. With advanced security features such as biometric authentication and encrypted storage, users can rest assured that their data and personal information are well-protected from unauthorized access.

In conclusion, the Desa CRN30 stands out as a powerful, reliable, and secure device that caters to the needs of modern users. Its exceptional features, advanced technology, and user-friendly design make it an ideal choice for anyone looking to enhance their productivity and experience in an increasingly digital world. Whether for work or leisure, the Desa CRN30 promises to deliver outstanding results.
Top Page Image Contents