Desa CRN30 To Select Heating Level, To Turn OFF GAS To Appliance, Manual Lighting Procedure

Page 15

OPERATING HEATER

Continued

TO SELECT

HEATING LEVEL

WARNING: When running heater, set control knob at LOW, MEDIUM or HIGH locked posi- tions. Never set control knob between locked positions. Poor combustion and higher levels of carbon monoxide may result.

CAUTION: Do not try to ad- just heating levels by using the equipment shutoff valve.

Slightly press in control knob and turn coun-

terclockwise to the LOW, MED or HI positions (see Figure 21).

IMPORTANT: Release downward pressure while turning control knob. Control knob will lock at the desired position.

Control

CRN18

 

 

CRN30

Knob

CRP16

 

 

CRP26

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LOW

MED

HI

OFF

Figure 21 - Burner Patterns for Non-

Thermostat Models

TO TURN OFF GAS

TO APPLIANCE

Shutting Off Heater

1.Turn control knob clockwise to the OFF position.

2.Turn off all electric power to the appliance if service is to be performed.

Shutting Off Burner Only (pilot stays lit)

Turn control knob clockwise to the PILOT position.

MANUAL LIGHTING

PROCEDURE

1.Remove front panel (see Figure 7, page 8).

2.Follow steps 1 through 5 under Lighting Instructions, page 14.

3.With control knob pressed in, strike match. Hold match to pilot until pilot lights.

4.Keep control knob pressed in for 30 seconds after lighting pilot. After 30 seconds, release control knob. Now follow step 8, under Lighting Instructions, page 14.

5.Replace front panel.

THERMOSTAT MODELS

FOR YOUR SAFETY READ

BEFORE LIGHTING

WARNING: If you do not fol- low these instructions exactly, a fire or explosion may result causing property damage, per- sonal injury or loss of life.

A.This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these instructions exactly.

B.BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance.

•Do not touch any electric switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighborʼs phone. Follow the gas supplierʼs instructions.

•If you cannot reach your gas supplier, call the fire department.

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, donʼt try to repair it, call a qualified service tech- nician or gas supplier. Force or attempted repair may result in a fire or explosion.

D.Do not use this appliance if any part has been under water. Immediately call a qualified ser- vice technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

107883-01H

www.desatech.com

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Model CRN30 Shown CRP26, CRP26T, CRT26PT, CRN30, CRN30T, CRT30NTTable of Contents Safety Information Product Features Local CodesUnpacking AIR for Combustion Ventilation Providing Adequate VentilationDetermining FRESH-AIR Flow for Heater Location Ventilation Air From Inside Building Ventilation AIRLocating Heater InstallationInstallation Items Check GAS TypeMounting Bracket Installing Heater to WallThermostat Sensing Bulb Thermostat Models OnlyAttaching To Wall Anchor Method Methods For Attaching Mounting Bracket To WallMarking Screw Locations Plaque HeaterPlacing Heater On Mounting Bracket Installing Bottom Mounting ScrewsMounting Base Feet to Heater Connecting to GAS SupplyMounting Base Feet to Floor Where required by local code Mounting Heater to FloorJoint Nipple Sediment Trap From External Regulator Checking GAS ConnectionsTest Pressures Equal To or Less Than 1/2 Psig 3.5 kPa Test Pressures In Excess Of 1/2 Psig 3.5 kPaNON-THERMOSTAT Models For Your Safety Read Before Lighting Operating HeaterLighting Instructions To Turn OFF GAS To Appliance Manual Lighting ProcedureThermostat Models For Your Safety Read Before Lighting To Select Heating LevelControl Knob CRP16T CRP26T Ignitor Button Control KnobBurner Flame Pattern Inspecting HeaterThermostat Operation Pilot Flame PatternCleaning Maintenance Service HintsTechnical Service Observed Problem Possible Cause Remedy TroubleshootingODS/pilot lights but flame Gas leak. See Warning CRN18, CRN18T CRN30, CRN30T CRT30NT SpecificationsAccessories Replacement PartsService Publications Cabinet Body Models Illustrated Parts BreakdownParts List Cabinet Body Models CRT26PT and CRT30NT KEY Part Number CRT26PT CRT30NT Description QTY Burner Assembly Models CRP16, CRN18, CRP26 and CRN30 110803-02 Illustrated Parts Breakdown Parts Central Warranty Information Keep this WarrantyLimited Warranty VENT-FREE Infrared GAS Heaters

CRN30 specifications

Desa CRN30 is an innovative and versatile product designed to meet the growing demands of modern users seeking efficiency and reliability in their daily tasks. This advanced device, characterized by its cutting-edge features and robust technology, stands out in the market for both personal and professional use.

One of the main features of the Desa CRN30 is its powerful processing unit, which is engineered to handle multitasking with ease. Equipped with a high-performance chipset, it ensures smooth operation across various applications, making it ideal for users who demand speed and efficiency. The device also boasts ample memory and storage options, allowing users to seamlessly manage large files and run multiple applications simultaneously without any lag.

In terms of connectivity, the Desa CRN30 offers a range of options, including Bluetooth, Wi-Fi, and USB connections, ensuring that users can easily connect to a variety of devices and networks. This seamless connectivity allows for effortless data transfer and communication, enhancing productivity for both personal and professional tasks.

The durability of the Desa CRN30 is another significant characteristic. Constructed with high-quality materials, the device is designed to withstand rigorous use while maintaining a sleek and sophisticated appearance. Its lightweight design adds to its portability, making it easy for users to carry it wherever they go, whether to meetings, on commutes, or while traveling.

User experience is enhanced through an intuitive interface that provides easy navigation. The device features a vibrant display that ensures clear visibility in various lighting conditions, further elevating the user experience. Additionally, the Desa CRN30 is compatible with a range of applications, providing users with the flexibility to customize their device according to their specific needs.

Security is also a prime consideration in the design of the Desa CRN30. With advanced security features such as biometric authentication and encrypted storage, users can rest assured that their data and personal information are well-protected from unauthorized access.

In conclusion, the Desa CRN30 stands out as a powerful, reliable, and secure device that caters to the needs of modern users. Its exceptional features, advanced technology, and user-friendly design make it an ideal choice for anyone looking to enhance their productivity and experience in an increasingly digital world. Whether for work or leisure, the Desa CRN30 promises to deliver outstanding results.
Top Page Image Contents