Desa CRN30 Methods For Attaching Mounting Bracket To Wall, Marking Screw Locations, Plaque Heater

Page 9

INSTALLATION

Continued

Methods For Attaching Mounting Bracket To Wall

Only use last hole on each end of mounting bracket to attach bracket to wall. These two holes are 14 inches apart from their centers. Attach mounting bracket to wall in one of two ways:

1.Attaching to wall stud

2.Attaching to wall anchor

Attaching to Wall Stud: This method provides the strongest hold. Insert mounting screws through mounting bracket and into wall studs.

Attaching to Wall Anchor: This method allows you to attach mounting bracket to hollow walls (wall areas between studs) or to solid walls (concrete or masonry).

Decide which method better suits your needs. Either method will provide a secure hold for the mounting bracket.

Marking Screw Locations

1.Tape mounting bracket to wall where heater will be located. Make sure mounting bracket is level.

WARNING: Maintain mini- mumclearancesshowninFigure

8.If you can, provide greater clearances from floor and join- ing wall.

2.Mark screw locations on wall (see Figure 8).

Note: Only mark last hole on each end of mounting bracket. Insert mounting screws through these holes only.

3.Remove tape and mounting bracket from wall.

16"

14"

Min.

 

WallAdjoining

Only Insert Mounting

18 3/4"

Screws Through Last

Min.

 

 

Hole On Each End

 

 

 

Floor

 

4 and 5 Plaque Heaters

 

12"

14"

 

Min.

 

AdjoiningWall

Only Insert Mounting

18 3/4"

Screws Through Last

Min.

 

Hole On Each End

 

 

Floor

3 Plaque Heater

Figure 8 - Mounting Bracket Clearances

Attaching Mounting Bracket To Wall

Note: Wall anchors, mounting screws and spacers are in hardware package. The hardware package is provided with heater.

Attaching To Wall Stud Method

For attaching mounting bracket to wall studs

1.Drill holes at marked locations using 9/64" drill bit.

2.Place mounting bracket onto wall. Line up last hole on each end of bracket with holes drilled in wall.

3.Insert mounting screws through bracket and into wall studs.

4.Tighten screws until mounting bracket is firmly fastened to wall studs.

Attaching To Wall Anchor Method

For attaching mounting bracket to hollow walls (wall areas between studs) or solid walls (concrete or masonry)

1.Drill holes at marked locations using 5/16" drill bit. For solid walls (concrete or masonry), drill at least 1" deep.

2.Fold wall anchor as shown in Figure 9, page 10.

107883-01H

www.desatech.com

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Model CRN30 Shown CRP26, CRP26T, CRT26PT, CRN30, CRN30T, CRT30NTTable of Contents Safety Information Product Features Local CodesUnpacking AIR for Combustion Ventilation Providing Adequate VentilationDetermining FRESH-AIR Flow for Heater Location Ventilation Air From Inside Building Ventilation AIRInstallation Items InstallationCheck GAS Type Locating HeaterThermostat Sensing Bulb Installing Heater to WallThermostat Models Only Mounting BracketMarking Screw Locations Methods For Attaching Mounting Bracket To WallPlaque Heater Attaching To Wall Anchor MethodPlacing Heater On Mounting Bracket Installing Bottom Mounting ScrewsMounting Base Feet to Floor Where required by local code Connecting to GAS SupplyMounting Heater to Floor Mounting Base Feet to HeaterJoint Nipple Sediment Trap From External Regulator Checking GAS ConnectionsTest Pressures Equal To or Less Than 1/2 Psig 3.5 kPa Test Pressures In Excess Of 1/2 Psig 3.5 kPaNON-THERMOSTAT Models For Your Safety Read Before Lighting Operating HeaterLighting Instructions Thermostat Models For Your Safety Read Before Lighting Manual Lighting ProcedureTo Select Heating Level To Turn OFF GAS To ApplianceControl Knob CRP16T CRP26T Ignitor Button Control KnobThermostat Operation Inspecting HeaterPilot Flame Pattern Burner Flame PatternCleaning Maintenance Service HintsTechnical Service Observed Problem Possible Cause Remedy TroubleshootingODS/pilot lights but flame Gas leak. See Warning CRN18, CRN18T CRN30, CRN30T CRT30NT SpecificationsAccessories Replacement PartsService Publications Cabinet Body Models Illustrated Parts BreakdownParts List Cabinet Body Models CRT26PT and CRT30NT KEY Part Number CRT26PT CRT30NT Description QTY Burner Assembly Models CRP16, CRN18, CRP26 and CRN30 110803-02 Illustrated Parts Breakdown Parts Central Warranty Information Keep this WarrantyLimited Warranty VENT-FREE Infrared GAS Heaters

CRN30 specifications

Desa CRN30 is an innovative and versatile product designed to meet the growing demands of modern users seeking efficiency and reliability in their daily tasks. This advanced device, characterized by its cutting-edge features and robust technology, stands out in the market for both personal and professional use.

One of the main features of the Desa CRN30 is its powerful processing unit, which is engineered to handle multitasking with ease. Equipped with a high-performance chipset, it ensures smooth operation across various applications, making it ideal for users who demand speed and efficiency. The device also boasts ample memory and storage options, allowing users to seamlessly manage large files and run multiple applications simultaneously without any lag.

In terms of connectivity, the Desa CRN30 offers a range of options, including Bluetooth, Wi-Fi, and USB connections, ensuring that users can easily connect to a variety of devices and networks. This seamless connectivity allows for effortless data transfer and communication, enhancing productivity for both personal and professional tasks.

The durability of the Desa CRN30 is another significant characteristic. Constructed with high-quality materials, the device is designed to withstand rigorous use while maintaining a sleek and sophisticated appearance. Its lightweight design adds to its portability, making it easy for users to carry it wherever they go, whether to meetings, on commutes, or while traveling.

User experience is enhanced through an intuitive interface that provides easy navigation. The device features a vibrant display that ensures clear visibility in various lighting conditions, further elevating the user experience. Additionally, the Desa CRN30 is compatible with a range of applications, providing users with the flexibility to customize their device according to their specific needs.

Security is also a prime consideration in the design of the Desa CRN30. With advanced security features such as biometric authentication and encrypted storage, users can rest assured that their data and personal information are well-protected from unauthorized access.

In conclusion, the Desa CRN30 stands out as a powerful, reliable, and secure device that caters to the needs of modern users. Its exceptional features, advanced technology, and user-friendly design make it an ideal choice for anyone looking to enhance their productivity and experience in an increasingly digital world. Whether for work or leisure, the Desa CRN30 promises to deliver outstanding results.
Top Page Image Contents