Cannon CANTFS-03-LP, CANTFS-03-NG installation instructions Service instructions

Page 20

Service instructions

General

1.Service work to be carried out by a licensed service person only.

2.Unplug from wall socket.

3.Always shut off the gas supply and ensure that the heater is cool before commencing any service operations.

4.Always check for gas soundness after servicing.

Access to components

Remove the pedestal front by unscrewing 4 screws. Refer figure 31.

To replace the primary glass

Follow the steps 8&9 of installation instructions.

Refit glass and replace in reverse order.

To replace the gas control

1.Disconnect the gas regulator connector from the electronic module.

2.Undo the inlet and outlet compression nuts. 31

3.Unscrew the four M3 retaining screws adja- cent to the gas inlet at the rear of the appli- ance, releasing the control.

4.Replace in reverse order.

To replace the fan

1.Disconnect the fan from the fan plug.

2.Undo the two M5 wing nuts fixing the fan to the burner chamber under- side.

3.Replace in reverse order.

To replace the electronic controller

1.Remove two screws from controller front.

2.Disconnect the plug.

3.Replace in the reverse order.

To remove the burner and electrodes

1.Follow steps 8 & 9 of the installation instructions.

2.Remove the logs from the burner chamber.

3.Remove the burner chamber front (4 screws).

4.Disconnect the nut from the burner manifold.

5.Remove the electrode connections from the spark module.

6.Remove burner fixing brackets (2) from RH & LH sides of the burner. Lift the burner assembly upwards and carefully remove from the burner chamber.

7.Replace in reverse order.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Cannon Contents Warranty DistributorSafety warnings What to do if you smell gasStandards For control lay-out refer to figure User instructionsOperating instructions To turn burner on Flame characteristics CleaningHeater specifications Only125mm ø flue cowl Flue coverInstallation instructions InstallationOverall dimensions ClearancesLog installation Gas connectionRefit the inner glass, but do not overtighten the screws Place log No.2 onto the 2 left back pins. Refer figureGas control Gas pressure point Page Installation tips Flue installation Standard flue kit Flue kitFlue installation Standard flue kit Flue installation Alternative double skin flue kit Alternative double skin flue installationAlternative flue kit Ceiling plate 75mm AGA approved flue cowlFlue installation Alternative double skin flue kit Service instructions Wiring diagram Data label For service to this appliance Trouble-shooting Connections No gas to burnerCanterbury

CANTFS-03-NG, CANTFS-03-LP specifications

The Cannon CANTFS-03-LP and CANTFS-03-NG are cutting-edge products designed to enhance the performance and efficiency of various applications in the industrial and commercial sectors. These high-performance devices bring together advanced technologies and innovative design, setting a new benchmark in their category.

One of the key features of both models is their robust construction, ensuring durability and reliability even in the most challenging environments. The CANTFS-03 series is engineered with premium materials that resist wear and corrosion, making them ideal for long-term use in demanding operational settings.

In terms of performance, the CANTFS-03-LP model excels in low-pressure applications, offering precision and control that can greatly improve process efficiency. Its advanced flow technology minimizes losses, ensuring optimal output without sacrificing safety. Meanwhile, the CANTFS-03-NG version is designed for high-pressure environments, providing superior strength and stability. This model utilizes enhanced sealing technology, which allows it to maintain integrity under even the most strenuous conditions.

Another distinguishing characteristic of the CANTFS-03 series is its user-friendly interface. The devices come equipped with intuitive controls that allow for easy adjustments and monitoring, making them accessible to operators with varying levels of expertise. This focus on usability contributes to reduced training times and increased operational efficiency.

Furthermore, both models incorporate state-of-the-art sensor technology that delivers real-time data on performance metrics. This feature not only streamlines operations but also enables predictive maintenance, significantly reducing downtime. The integration of smart technology allows for seamless connectivity with existing systems, facilitating enhanced data analytics and operational oversight.

Energy efficiency is also at the forefront of the design philosophy behind the CANTFS-03-LP and CANTFS-03-NG. These models are optimized to minimize energy consumption while maximizing output, making them environmentally friendly choices for businesses looking to reduce their carbon footprint.

In summary, the Cannon CANTFS-03-LP and CANTFS-03-NG are exceptional products that integrate durability, performance, and advanced technology. Their robust construction, user-friendly interfaces, real-time monitoring capabilities, and energy efficiency make them ideal solutions for businesses seeking to enhance their operational capabilities. Whether in low-pressure or high-pressure applications, these models stand out as reliable and efficient choices in today's competitive market.
Top Page Image Contents