Cannon CANTFS-03-NG, CANTFS-03-LP installation instructions Connections, No gas to burner

Page 23

9.No gas to burner.

•The gas valve should open at the same time as the igniter sparks. If there is no gas to the burner when this occurs check the solenoid coils for continuity.

•Check that the gas pressure is present at the test point when the spark is being generated.

•Check that there is gas to the inlet of the gas control.

10.Appliance lights but goes into lockout.

•Test the flame for correct ionisation signal. Connect a multimeter in series with the flame rod and set the function to measure micro-amps. The module will go into lockout if the flame current sensitivity is less than 0.5 micro-amps. The approximate signal strength on high flame is about 10 micro-amps and on low

4 micro-amps. The signal strength will fluctuate but should be greater than 1.5 micro-amps at all times. Take precaution because the ionisation probe can have a high negative voltage and can cause shock.

11. Fuse blowing.• If the fuse continues to blow check the solenoid coils for signs of them being shorted.

• Check the fan and wiring for short circuit.

Connections

Terminals 5, 6 and 7 at the module 12 way connector are bridged.

Terminal 10 at the module 12 way connector is the active supply via the red wire.

Terminal 11 at the module 12 way connector is the neutral supply via the blue wire.

Terminal 12 at the module 12 way connector is the earth connection via the green/yellow wire.

Terminal 12 at the module 2 way connector is the neutral connection via a brown wire which is joined into the rectifier cable then into the 8 way switch connector blue wire.

Terminal 14 is an active connection at the module 2 way connector via a white wire into the 8 way switch connector. This is active only when the flame is sensed.

32

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Cannon Contents Distributor WarrantyWhat to do if you smell gas Safety warningsStandards For control lay-out refer to figure User instructionsOperating instructions To turn burner on Cleaning Flame characteristicsFlue cover Heater specificationsOnly 125mm ø flue cowlClearances Installation instructionsInstallation Overall dimensionsGas connection Log installationRefit the inner glass, but do not overtighten the screws Place log No.2 onto the 2 left back pins. Refer figureGas control Gas pressure point Page Installation tips Flue kit Flue installation Standard flue kitFlue installation Standard flue kit Ceiling plate 75mm AGA approved flue cowl Flue installation Alternative double skin flue kitAlternative double skin flue installation Alternative flue kitFlue installation Alternative double skin flue kit Service instructions Wiring diagram Data label For service to this appliance Trouble-shooting No gas to burner ConnectionsCanterbury

CANTFS-03-NG, CANTFS-03-LP specifications

The Cannon CANTFS-03-LP and CANTFS-03-NG are cutting-edge products designed to enhance the performance and efficiency of various applications in the industrial and commercial sectors. These high-performance devices bring together advanced technologies and innovative design, setting a new benchmark in their category.

One of the key features of both models is their robust construction, ensuring durability and reliability even in the most challenging environments. The CANTFS-03 series is engineered with premium materials that resist wear and corrosion, making them ideal for long-term use in demanding operational settings.

In terms of performance, the CANTFS-03-LP model excels in low-pressure applications, offering precision and control that can greatly improve process efficiency. Its advanced flow technology minimizes losses, ensuring optimal output without sacrificing safety. Meanwhile, the CANTFS-03-NG version is designed for high-pressure environments, providing superior strength and stability. This model utilizes enhanced sealing technology, which allows it to maintain integrity under even the most strenuous conditions.

Another distinguishing characteristic of the CANTFS-03 series is its user-friendly interface. The devices come equipped with intuitive controls that allow for easy adjustments and monitoring, making them accessible to operators with varying levels of expertise. This focus on usability contributes to reduced training times and increased operational efficiency.

Furthermore, both models incorporate state-of-the-art sensor technology that delivers real-time data on performance metrics. This feature not only streamlines operations but also enables predictive maintenance, significantly reducing downtime. The integration of smart technology allows for seamless connectivity with existing systems, facilitating enhanced data analytics and operational oversight.

Energy efficiency is also at the forefront of the design philosophy behind the CANTFS-03-LP and CANTFS-03-NG. These models are optimized to minimize energy consumption while maximizing output, making them environmentally friendly choices for businesses looking to reduce their carbon footprint.

In summary, the Cannon CANTFS-03-LP and CANTFS-03-NG are exceptional products that integrate durability, performance, and advanced technology. Their robust construction, user-friendly interfaces, real-time monitoring capabilities, and energy efficiency make them ideal solutions for businesses seeking to enhance their operational capabilities. Whether in low-pressure or high-pressure applications, these models stand out as reliable and efficient choices in today's competitive market.
Top Page Image Contents