Cannon CANTFS-03-LP, CANTFS-03-NG Flue installation Standard flue kit, Flue kit

Page 16

Flue installation - Standard flue kit

This heater is a flued appliance. It must be properly connected to a flue system in accordance with the latest edition of the Gas Installation Code, AS 5601/AG 601.

If elbows are required, we recommend 45° only and no more than two in the total flue run, there should also be a minimum of 250mm straight flue section in between bends..

If practical, locate the heater in a position to minimise the need for elbows.

There must be at least 1.8mm of vertical before any changes in direction of the flue.

If placed against a combustible wall the 40mm rear spacers locate against the wall.

1.Ensure clearances to combustible constructions have been observed. For clearances refer page 10.

2.The centre line of the flue is 120mm to rear of appliance (including rear spacers).

3.Carry out installation as per figure 25 (ceiling plate installation) and figure 26 (flue installation).

Cut a hole 180mm ø in the ceiling in line with the flue position. Secure ceiling plate against the ceiling by bending out the tabs above the ceiling.

Note: If the ceiling has an incline, the ceiling box will need to be fitted. The ceiling box is an accessory and can be ordered from the supplier. Installation instructions are supplied with the ceiling box. Part no: BOXFB.

25

Flue kit

The flue kit contains:

2 x 900mm lengths of 125mm ø painted upper flue. 1 x 900mm painted bottom flue spigot.

1 x 900mm length of 125mm ø plain flue.

1 x ceiling plate.

1 x 125mm AGA approved gas cowl.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Cannon Contents Warranty DistributorSafety warnings What to do if you smell gasStandards Operating instructions User instructionsFor control lay-out refer to figure To turn burner on Flame characteristics CleaningHeater specifications Only125mm ø flue cowl Flue coverInstallation instructions InstallationOverall dimensions ClearancesLog installation Gas connectionGas control Place log No.2 onto the 2 left back pins. Refer figureRefit the inner glass, but do not overtighten the screws Gas pressure point Page Installation tips Flue installation Standard flue kit Flue kitFlue installation Standard flue kit Flue installation Alternative double skin flue kit Alternative double skin flue installationAlternative flue kit Ceiling plate 75mm AGA approved flue cowlFlue installation Alternative double skin flue kit Service instructions Wiring diagram Data label For service to this appliance Trouble-shooting Connections No gas to burnerCanterbury

CANTFS-03-NG, CANTFS-03-LP specifications

The Cannon CANTFS-03-LP and CANTFS-03-NG are cutting-edge products designed to enhance the performance and efficiency of various applications in the industrial and commercial sectors. These high-performance devices bring together advanced technologies and innovative design, setting a new benchmark in their category.

One of the key features of both models is their robust construction, ensuring durability and reliability even in the most challenging environments. The CANTFS-03 series is engineered with premium materials that resist wear and corrosion, making them ideal for long-term use in demanding operational settings.

In terms of performance, the CANTFS-03-LP model excels in low-pressure applications, offering precision and control that can greatly improve process efficiency. Its advanced flow technology minimizes losses, ensuring optimal output without sacrificing safety. Meanwhile, the CANTFS-03-NG version is designed for high-pressure environments, providing superior strength and stability. This model utilizes enhanced sealing technology, which allows it to maintain integrity under even the most strenuous conditions.

Another distinguishing characteristic of the CANTFS-03 series is its user-friendly interface. The devices come equipped with intuitive controls that allow for easy adjustments and monitoring, making them accessible to operators with varying levels of expertise. This focus on usability contributes to reduced training times and increased operational efficiency.

Furthermore, both models incorporate state-of-the-art sensor technology that delivers real-time data on performance metrics. This feature not only streamlines operations but also enables predictive maintenance, significantly reducing downtime. The integration of smart technology allows for seamless connectivity with existing systems, facilitating enhanced data analytics and operational oversight.

Energy efficiency is also at the forefront of the design philosophy behind the CANTFS-03-LP and CANTFS-03-NG. These models are optimized to minimize energy consumption while maximizing output, making them environmentally friendly choices for businesses looking to reduce their carbon footprint.

In summary, the Cannon CANTFS-03-LP and CANTFS-03-NG are exceptional products that integrate durability, performance, and advanced technology. Their robust construction, user-friendly interfaces, real-time monitoring capabilities, and energy efficiency make them ideal solutions for businesses seeking to enhance their operational capabilities. Whether in low-pressure or high-pressure applications, these models stand out as reliable and efficient choices in today's competitive market.
Top Page Image Contents