Cannon CANTFS-03-LP, CANTFS-03-NG installation instructions

Page 14

Important:

To achieve the correct visual flame effect:

On Propane the gas pressure must be set at

2.65kPa with burner operating on maximum setting.

On Natural Gas the gas pressure must be set at 0.75kPa.

18.Switch the top two control buttons to “Full On” position as indicated in figure 23(a) and using a ring spanner, as per figure 23(b), adjust the pressure to 0.75 kPa for Natural gas or 2.65 kPa for LPG. (Turn clock- wise to increase pressure and anticlockwise to decrease pressure).

23

19.Switch the heat button back to “Low Flame’ position as indicated in figure 24(a), retain spanner in position and using a screwdriver as per figure 24(b) adjust the central screw control to give a pressure reading of 0.3 kPa for Natural Gas and 1.1 kPa for LPG. (Turn clock- wise to increase pressure and anticlockwise to decrease pressure).

24

20.Switch burners off and remove the manometer tube. Tighten pressure test point by turning the captive screw fully clockwise.

Replace plastic cap. Ensure the little lug is positioned towards lower right hand side to clear the control.

21.Refit the lower front cover, making sure not to damage the power cord.

22.Follow User Instructions to turn on heater and test for correct operation before leaving.

23.The heater flames should be stable, not lifting from burner and the logs should glow after approximately 15 minutes operation on HIGH set- ting.

The heater has been designed to burn with luminous flames, which mimic natural log combustion, and may exhibit slight carbon deposi- tion. If heavy carbon deposits occurs or flames impinge on the roof of the combustion chamber, turn the appliance off and contact the service agent in your state.

24.If after following these installation instructions,and the trouble shooting chart on page 22-23, the heater does not perform correctly contact the our Technical Services Department. For contact details please refer page 21.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Cannon Contents Warranty DistributorSafety warnings What to do if you smell gasStandards For control lay-out refer to figure User instructionsOperating instructions To turn burner on Flame characteristics Cleaning125mm ø flue cowl Heater specificationsOnly Flue coverOverall dimensions Installation instructionsInstallation ClearancesLog installation Gas connectionRefit the inner glass, but do not overtighten the screws Place log No.2 onto the 2 left back pins. Refer figureGas control Gas pressure point Page Installation tips Flue installation Standard flue kit Flue kitFlue installation Standard flue kit Alternative flue kit Flue installation Alternative double skin flue kitAlternative double skin flue installation Ceiling plate 75mm AGA approved flue cowlFlue installation Alternative double skin flue kit Service instructions Wiring diagram Data label For service to this appliance Trouble-shooting Connections No gas to burnerCanterbury

CANTFS-03-NG, CANTFS-03-LP specifications

The Cannon CANTFS-03-LP and CANTFS-03-NG are cutting-edge products designed to enhance the performance and efficiency of various applications in the industrial and commercial sectors. These high-performance devices bring together advanced technologies and innovative design, setting a new benchmark in their category.

One of the key features of both models is their robust construction, ensuring durability and reliability even in the most challenging environments. The CANTFS-03 series is engineered with premium materials that resist wear and corrosion, making them ideal for long-term use in demanding operational settings.

In terms of performance, the CANTFS-03-LP model excels in low-pressure applications, offering precision and control that can greatly improve process efficiency. Its advanced flow technology minimizes losses, ensuring optimal output without sacrificing safety. Meanwhile, the CANTFS-03-NG version is designed for high-pressure environments, providing superior strength and stability. This model utilizes enhanced sealing technology, which allows it to maintain integrity under even the most strenuous conditions.

Another distinguishing characteristic of the CANTFS-03 series is its user-friendly interface. The devices come equipped with intuitive controls that allow for easy adjustments and monitoring, making them accessible to operators with varying levels of expertise. This focus on usability contributes to reduced training times and increased operational efficiency.

Furthermore, both models incorporate state-of-the-art sensor technology that delivers real-time data on performance metrics. This feature not only streamlines operations but also enables predictive maintenance, significantly reducing downtime. The integration of smart technology allows for seamless connectivity with existing systems, facilitating enhanced data analytics and operational oversight.

Energy efficiency is also at the forefront of the design philosophy behind the CANTFS-03-LP and CANTFS-03-NG. These models are optimized to minimize energy consumption while maximizing output, making them environmentally friendly choices for businesses looking to reduce their carbon footprint.

In summary, the Cannon CANTFS-03-LP and CANTFS-03-NG are exceptional products that integrate durability, performance, and advanced technology. Their robust construction, user-friendly interfaces, real-time monitoring capabilities, and energy efficiency make them ideal solutions for businesses seeking to enhance their operational capabilities. Whether in low-pressure or high-pressure applications, these models stand out as reliable and efficient choices in today's competitive market.
Top Page Image Contents