Ð5Ð

INSTALLATION OF HUMBBSFP1016-A--

FAN POWERED HUMIDIFIER

Bryant's HUMBBSFP1016-A-- fan powered humidifier can only be installed on the supply plenum of a forced-air system. This unit requires an external 115-vac (fused) plug-in receptacle near the equipment for proper operation.

It is recommended to install the humidifier where it can be easily serviced. Pad access door can be easily converted from right to the left hand side. Always install humidifier downstream of an electronic air cleaner.

→I. INSPECT PACKAGE AND CHECK EQUIPMENT

Inspect contents of packaged humidifier. File claim with shipping company prior to installation, if shipment is damaged or incom- plete.

The package should contain:

1.Humidifier and media assembly

2.Humidistat

3.Template

4.Owner's Manual

5.Warranty Certificate

6.Solenoid valve

7.Saddle valve assembly with adapter

8.Four sheet metal screws

9.Foam tape

10.Noise suppressor (use for water pressure over 60 psi)

11.Worm clamp for field-supplied drain tube

12.Humidifier maintenance instruction sticker

13.Bryant logo label

"N" COIL

HORIZONTAL

VERTICALHORIZONTAL

A97098

Fig. 7ÐInstallation of HUMBBSFP1016-A--

Fan-Type Humidifier

II.SELECT LOCATION (SEE FIG. 7.)

Humidifier must be installed on supply plenum only. If furnace has air conditioning coil, be sure humidifier does not interfere with coil ends. Remember to provide clearance for maintenance and evapo- rator pad removal.

To reverse pad access from right to the left side:

1.Remove side door and media pad assembly.

2.Remove 4 screws and separate top assembly from lower mounting base. (See Fig. 8.)

3.Rotate lower mounting base 180 degrees, so side access door is now on left.

4.Snap together top assembly to mounting base and reinstall screws.

5.Replace media pad assembly (with distributor reservoir up) and side access door.

A96049

Fig. 8ÐReversing Door Access

on HUMBBSFP1016-A--

CAUTION: When re-installing media pad assembly into plastic housing, insure the assembly drain stub aligns into the drain outlet located in bottom of humidifier. Unit can leak if drain stub does not align with drain outlet. (See Fig. 9.)

IMPORTANT: Make sure front housing assembly with electrical cord is facing down.

	MEDIA PAD
	ASSEMBLY
	DRAIN
	OUTLET
HOUSING	VINYL DRAIN
ENCLOSURE	TUBING
DRAIN OUTLET
	A97108

Fig. 9ÐMedia Pad Assembly Installation

III.PREPARE PLENUM OPENING (SEE FIG. 2.)

1.Use template for marking humidifier opening.

2.Tape in place on plenum making sure template is level.

IMPORTANT: For humidifier to operate properly it must be level and mounted on a vertical surface.

3.Drill four 1/8-in. holes in plenum.

4.Cut opening in plenum using heavy solid lines on template as a guide.

HUM-56-1 specifications

The Bryant HUM-56-1 is a cutting-edge heating, ventilation, and air conditioning (HVAC) unit that has garnered attention in both residential and commercial sectors for its advanced features and efficient performance. Designed to provide optimal climate control, the HUM-56-1 incorporates several innovative technologies that set it apart from traditional HVAC systems.

One of the standout features of the Bryant HUM-56-1 is its high-efficiency design. The unit boasts an impressive Seasonal Energy Efficiency Ratio (SEER) rating, which indicates its ability to deliver maximum cooling with minimal energy consumption. This efficiency translates into lower utility bills and a reduced carbon footprint, making it an environmentally conscious choice for homeowners and businesses alike.

The HUM-56-1 employs advanced smart technology, including Wi-Fi connectivity and compatibility with smart home systems. This allows users to monitor and control their HVAC system remotely via mobile devices, providing convenience and flexibility. The unit also features programmable settings that enable users to customize their indoor climate according to their schedules, further enhancing energy savings and comfort.

Another key characteristic of the HUM-56-1 is its quiet operation. Equipped with sound-dampening features, the unit minimizes noise levels, ensuring a peaceful indoor environment. This is particularly beneficial for residential applications where noise disruption can impact daily life.

In terms of air quality management, the HUM-56-1 is designed to optimize indoor air quality. The unit is compatible with advanced filtration systems that remove allergens and pollutants from the air, making it an excellent choice for allergy sufferers. Additionally, the system’s ventilation capabilities ensure fresh air circulation, promoting a healthier living space.

Durability is a crucial aspect of the Bryant HUM-56-1. Constructed with high-quality materials, the unit is built to withstand various environmental conditions, ensuring longevity and reliable performance. Bryant also backs the HUM-56-1 with a comprehensive warranty, highlighting their commitment to quality and customer satisfaction.

Overall, the Bryant HUM-56-1 stands out in the HVAC market due to its efficiency, smart technology integration, quiet operation, enhanced air quality features, and durable construction. These characteristics make it a preferred choice for those seeking a reliable and effective climate control solution. Whether for residential or commercial use, the HUM-56-1 is poised to deliver outstanding performance and comfort all year round.