Hookup and Installation
Step 3
Remote AC Operation
This function allows you to turn your Power Console on and off via your preamplifier or receiver equipped with a switched European power socket.
Note: You cannot turn off the switched sockets on the Power Console with the “Switched” button on the front of the unit when there is any external power signal supplied to either the AC or DC remote inputs.
To install the Remote AC Control Cable:
A. Plug the C8 (Fig. 8 – female) end of the included Remote AC Control Cable into the “Remote AC IN” socket located on the back of the Power Console. (Fig. 3a)
B.Press the “Remote” button on the front of the Power Console to turn on the remote function. The LCD display should read “REMOTE ON”. (Fig. 3b)
C.Press the “Switched” button on the front of the Power Console to turn off the switched sockets.
D.Connect the Europlug (male) end of the Remote AC Control Cable into a switched power socket on a preamplifier or receiver. When you turn on the receiver or preamplifier, the sockets on the Power Console that are programmed as “Switched” will be turned on immediately and the “Switched/Delayed” sockets will come on after
PureAV Power Console
Fig. 3a | Fig. 3b |
10