Belkin PF50 user manual Step Connect your Pay-Per-View/Phone Line

Hookup and Installation

Step 9

Connect your Pay-Per-View/Phone Line

Your PureAV Power Console comes equipped with Pay-Per-View/phone- line protection with a built-in splitter. These are standard BT RJ11 phone ports and are labeled “Phone”.

A.Connect one end of your telephone cable to the wall port to which you normally connect your phone line. Connect the other end of your telephone cable to the Power Console phone port labeled “IN”.

B.Connect one end of the PureAV phone cable (included) to the Power Console phone port labeled “OUT”. Connect the other end of this cable to the Pay-Per-View phone port on your cable TV or satellite receiver.

C.To connect a telephone – Connect one end of another phone cable to the other Power Console phone port labeled “OUT”. Connect the other end of this cable to the telephone you want to use.

Note: We have included labels for the “Phone IN” and “Phone OUT” lines, if needed, for better organisation.

PureAV Power Console

�����������

�����

16