Hookup and Installation
Step 7
Connect Audio Components to the Audio Filter
The PureAV Power Console contains an isolated audio filter that is optimised to clean and condition the power to all of your audio components. The audio filter also isolates your audio components from connected digital, video, and
A. Attach PureAV power cable labels to each component’s power cable before you plug the cable into the sockets on the Power Console.
B.Connect the power cables of your audio components to any socket labeled under the “Audio Filter”. Examples of the most common audio components are listed below:
1.Tape Player
2.Receiver (Preamp)
3.Turntables
Note: You can connect any type of audio component into any of the audio filter sockets. You are not limited to the components listed above.
PureAV Power Console
14