Kidde KN-COSMXTR-B manual Alarm Response Time, Been fixed. Never Ignore the Alarm

Page 23

Alarm Response Time

been fixed. NEVER IGNORE THE ALARM!

The CO sensor meets the alarm response time requirements of UL standard 2034. Standard alarm times are as follows:

At 70 PPM, the unit must alarm within 60-240 minutes.

At 150 PPM, the unit must alarm within 10-50 minutes.

At 400 PPM, the unit must alarm within 4-15 minutes.

This carbon monoxide alarm is designed to detect carbon monoxide gas from ANY source of combus- tion. It is NOT designed to detect any other gas.

Fire Departments, most utility companies and HVAC con- tractors will perform CO inspections, some may charge for this service. It’s advisable to inquire about any applicable fees prior to having the service performed. Kidde will not pay for, or reimburse, the owner or user of this product, for any repair or dispatch calls related to the alarm sounding.

If any form of battery failure is detected the red LED light will flash and the unit will “chirp” one time, followed by the warning message “LOW BATTERY”. This cycle will occur once every minute for the first hour. After the first hour, the red LED light will continue flashing accompanied by the chirp only sound every 60 seconds. The voice message “LOW BATTERY” will sound once every fifteen minutes during the chirp only cycle, and will continue for at least seven days.

If the red LED light flashes along with a chirp every 30 seconds, and is not followed by the voice message “LOW BATTERY” as described above, your unit has malfunctioned. Call our toll free Consumer Hotline at 1- 800-880-6788 for instructions on how to return the unit.

Refer to Step 1 on page 8 for information on installing the batteries.

Replace batteries with one of the following approved brands: Duracell MN1500, MX1500 or Energizer E91. These batteries can be purchased at your local retailer.

21

Image 23
Contents Smoke Carbon Monoxide Alarm Table of Contents Introduction Light Emitting Diode Alarm SounderProduct View Back Battery Placement Battery ChamberFeatures Features Smoke Alarm Smoke Alarm FeaturesCarbon Monoxide CO Alarm Carbon Monoxide Alarm FeaturesInstalling Batteries Operating and Installation InstructionsRecommended Installation Locations Installation InstructionsSloped Ceiling Installation Mobile Homes Where Not to Installfor use in ordinary indoor locations How to Install Diagram D Figure a Tamper Resist FeatureTesting the Alarm Peak Level Memory Hush Control FeatureNever Ignore the Sound of the Alarm What To Do When The Alarm SoundsWhat To Do When The Alarm Sounds Never restart the source of a CO problem until it has Actuation of your CO AlarmIf alarm signal sounds Operate the test/reset button After following steps 1-3, if your alarm reactivatesBeen fixed. Never Ignore the Alarm Alarm Response TimeAlarm Replacement Battery ReplacementPossible Sources General MaintenanceCarbon Monoxide Safety Information General CO InformationSymptoms of CO Poisoning CO Safety TipsEscape Plan Fire Safety InformationFire Prevention California State Fire Marshall Industry Safety StandardsNRC Consumer Product Safety CommissionFive Year Limited Warranty Warranty and Service InformationWarranty and Service Information Questions or for More Information

KN-COSMXTR-B specifications

The Kidde KN-COSMXTR-B is a state-of-the-art combination carbon monoxide and smoke alarm designed to provide comprehensive safety for residential spaces. As an essential component of modern home safety systems, this device incorporates advanced technologies to ensure effective monitoring and alerts in case of hazardous conditions.

One of the standout features of the KN-COSMXTR-B is its dual-sensor technology, which combines both ionization and photoelectric sensing capabilities. Ionization sensors are particularly effective at detecting fast-flaming fires, making them ideal for kitchens or areas where cooking occurs. On the other hand, the photoelectric sensor excels at identifying slow-smoldering fires, often caused by burning materials. By integrating both types of sensors, the Kidde KN-COSMXTR-B offers enhanced detection reliability, significantly reducing the chances of false alarms while ensuring timely alerts during emergencies.

Another key characteristic of this alarm is its digital display, which provides real-time information about the levels of carbon monoxide present in the environment. This feature allows users to monitor CO levels accurately, understanding things beyond just standard alarm triggers. The device also includes a peak level memory that stores the highest CO reading, enabling homeowners to take necessary actions if elevated levels are recorded.

The KN-COSMXTR-B is user-friendly, equipped with a voice alarm feature that announces the type of danger detected, whether smoke or carbon monoxide. This vocal alert system is crucial, particularly for those who may struggle to recognize beeping sounds during stressful situations. Additionally, the alarm incorporates a test/reset button, making it easy to check functionality and silence the alarm when necessary.

Another notable aspect of the Kidde KN-COSMXTR-B is its battery backup. The device operates on a 9V battery, ensuring continued functionality even during power outages, which is essential for safety. Moreover, the unit is designed with a sleek and compact profile that blends seamlessly with various home decors while being easy to install, either on the wall or ceiling.

In conclusion, the Kidde KN-COSMXTR-B is an exemplary addition to any home safety setup. Its combination of dual-sensor technology, digital display, voice alerts, and battery backup empowers homeowners with reliable monitoring and peace of mind. Investing in this alarm means prioritizing safety against potentially life-threatening situations, making it a must-have for any household.