Kidde KN-COSMXTR-B manual Carbon Monoxide Alarm Features, Carbon Monoxide CO Alarm

Page 9

Carbon Monoxide Alarm Features

Smoke alarms cannot provide an alarm if smoke does not reach the alarm. Therefore, smoke alarms may not sense fires starting in chimneys, walls, on roofs, on the other side of a closed door or on a different floor.

If the alarm is located outside the bedroom or on a different floor, it may not wake up a sound sleeper.

The use of alcohol or drugs may also impair one’s ability to hear the smoke alarm. For maximum protection, a smoke alarm should be installed in each sleeping area on every level of a home.

Although smoke alarms can help save lives by providing an early warning of a fire, they are not a substitute for an insurance policy. Home owners and renters should have adequate insurance to protect their lives and property.

Carbon Monoxide (CO) Alarm

The carbon monoxide (CO) alarm monitors the air for the presence of CO. It will alarm when there are high levels of CO present, and when there are low levels of CO present over a longer period of time. When a CO condition match- es either of these situations, the alarm/voice message warn- ing system will sound, and be accompanied by the flashing red LED light. The carbon monoxide sensor uses an electro- chemical technology.

CAUTION: This alarm will only indicate the presence of carbon monoxide gas at the sensor. Carbon monox- ide gas may be present in other areas.

Individuals with medical problems may consider using warn- ing devices which provide audible and visual signals for car- bon monoxide concentrations under 30 ppm.

7

Image 9
Contents Smoke Carbon Monoxide Alarm Table of Contents Introduction Alarm Sounder Product ViewLight Emitting Diode Back Battery Placement Battery ChamberFeatures Features Smoke Alarm Smoke Alarm FeaturesCarbon Monoxide CO Alarm Carbon Monoxide Alarm FeaturesInstalling Batteries Operating and Installation InstructionsRecommended Installation Locations Installation InstructionsSloped Ceiling Installation Mobile Homes Where Not to Installfor use in ordinary indoor locations How to Install Diagram D Figure a Tamper Resist FeatureTesting the Alarm Peak Level Memory Hush Control FeatureNever Ignore the Sound of the Alarm What To Do When The Alarm SoundsWhat To Do When The Alarm Sounds If alarm signal sounds Operate the test/reset button Actuation of your CO AlarmAfter following steps 1-3, if your alarm reactivates Never restart the source of a CO problem until it hasBeen fixed. Never Ignore the Alarm Alarm Response TimeAlarm Replacement Battery ReplacementCarbon Monoxide Safety Information General MaintenanceGeneral CO Information Possible SourcesSymptoms of CO Poisoning CO Safety TipsEscape Plan Fire Safety InformationFire Prevention California State Fire Marshall Industry Safety StandardsNRC Consumer Product Safety CommissionFive Year Limited Warranty Warranty and Service InformationWarranty and Service Information Questions or for More Information

KN-COSMXTR-B specifications

The Kidde KN-COSMXTR-B is a state-of-the-art combination carbon monoxide and smoke alarm designed to provide comprehensive safety for residential spaces. As an essential component of modern home safety systems, this device incorporates advanced technologies to ensure effective monitoring and alerts in case of hazardous conditions.

One of the standout features of the KN-COSMXTR-B is its dual-sensor technology, which combines both ionization and photoelectric sensing capabilities. Ionization sensors are particularly effective at detecting fast-flaming fires, making them ideal for kitchens or areas where cooking occurs. On the other hand, the photoelectric sensor excels at identifying slow-smoldering fires, often caused by burning materials. By integrating both types of sensors, the Kidde KN-COSMXTR-B offers enhanced detection reliability, significantly reducing the chances of false alarms while ensuring timely alerts during emergencies.

Another key characteristic of this alarm is its digital display, which provides real-time information about the levels of carbon monoxide present in the environment. This feature allows users to monitor CO levels accurately, understanding things beyond just standard alarm triggers. The device also includes a peak level memory that stores the highest CO reading, enabling homeowners to take necessary actions if elevated levels are recorded.

The KN-COSMXTR-B is user-friendly, equipped with a voice alarm feature that announces the type of danger detected, whether smoke or carbon monoxide. This vocal alert system is crucial, particularly for those who may struggle to recognize beeping sounds during stressful situations. Additionally, the alarm incorporates a test/reset button, making it easy to check functionality and silence the alarm when necessary.

Another notable aspect of the Kidde KN-COSMXTR-B is its battery backup. The device operates on a 9V battery, ensuring continued functionality even during power outages, which is essential for safety. Moreover, the unit is designed with a sleek and compact profile that blends seamlessly with various home decors while being easy to install, either on the wall or ceiling.

In conclusion, the Kidde KN-COSMXTR-B is an exemplary addition to any home safety setup. Its combination of dual-sensor technology, digital display, voice alerts, and battery backup empowers homeowners with reliable monitoring and peace of mind. Investing in this alarm means prioritizing safety against potentially life-threatening situations, making it a must-have for any household.