Kidde KN-COSMXTR-B manual Installation Instructions, Recommended Installation Locations

Page 11

Operating and Installation Instructions

Step 2: Installation Instructions

IMPORTANT: THIS ALARM MUST BE MOUNTED ON A CEILING OR WALL. IT WAS NOT DESIGNED FOR USE AS A TABLETOP DEVICE! INSTALL ONLY AS DETAILED!

A. Recommended Installation Locations:

Kidde recommends the installation of a Smoke/CO Alarm in the following locations. For maximum protection we sug- gest an alarm be installed on each level of a multilevel home, including every bedroom, hallways, finished attics and basements. Put alarms at both ends of bedroom, hall- way or large room if hallway or room is more than

30 ft. (9.1m) long. If you have only one alarm, ensure it is placed in the hallway outside of the main sleeping area, or in the main bedroom. Verify the alarm can be heard in all sleeping areas.

Locate an alarm in every room where someone sleeps with the door closed. The closed door may prevent an alarm not located in that room from waking the sleeper. Smoke, heat and combustion products rise to the ceiling and spread hor- izontally. Mounting the alarm on the ceiling in the center of the room places it closest to all points in the room. Ceiling mounting is preferred in ordinary residential construction. When mounting an alarm on the ceiling, locate it at a minimum of 4” (10cm) from the side wall (see diagram A). If installing the alarm on the wall, use an inside wall with the top edge of the alarm at a minimum of 4” (10cm) and a maximum of 12” (30.5cm) below the ceiling (see Diagram A).

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Smoke Carbon Monoxide Alarm Table of Contents Introduction Light Emitting Diode Alarm SounderProduct View Back Battery Placement Battery ChamberFeatures Features Smoke Alarm Smoke Alarm FeaturesCarbon Monoxide CO Alarm Carbon Monoxide Alarm FeaturesInstalling Batteries Operating and Installation InstructionsRecommended Installation Locations Installation InstructionsSloped Ceiling Installation Mobile Homes Where Not to Installfor use in ordinary indoor locations How to Install Diagram D Figure a Tamper Resist FeatureTesting the Alarm Peak Level Memory Hush Control FeatureNever Ignore the Sound of the Alarm What To Do When The Alarm SoundsWhat To Do When The Alarm Sounds Never restart the source of a CO problem until it has Actuation of your CO AlarmIf alarm signal sounds Operate the test/reset button After following steps 1-3, if your alarm reactivatesBeen fixed. Never Ignore the Alarm Alarm Response TimeAlarm Replacement Battery ReplacementPossible Sources General MaintenanceCarbon Monoxide Safety Information General CO InformationSymptoms of CO Poisoning CO Safety TipsEscape Plan Fire Safety InformationFire Prevention California State Fire Marshall Industry Safety StandardsNRC Consumer Product Safety CommissionFive Year Limited Warranty Warranty and Service InformationWarranty and Service Information Questions or for More Information

KN-COSMXTR-B specifications

The Kidde KN-COSMXTR-B is a state-of-the-art combination carbon monoxide and smoke alarm designed to provide comprehensive safety for residential spaces. As an essential component of modern home safety systems, this device incorporates advanced technologies to ensure effective monitoring and alerts in case of hazardous conditions.

One of the standout features of the KN-COSMXTR-B is its dual-sensor technology, which combines both ionization and photoelectric sensing capabilities. Ionization sensors are particularly effective at detecting fast-flaming fires, making them ideal for kitchens or areas where cooking occurs. On the other hand, the photoelectric sensor excels at identifying slow-smoldering fires, often caused by burning materials. By integrating both types of sensors, the Kidde KN-COSMXTR-B offers enhanced detection reliability, significantly reducing the chances of false alarms while ensuring timely alerts during emergencies.

Another key characteristic of this alarm is its digital display, which provides real-time information about the levels of carbon monoxide present in the environment. This feature allows users to monitor CO levels accurately, understanding things beyond just standard alarm triggers. The device also includes a peak level memory that stores the highest CO reading, enabling homeowners to take necessary actions if elevated levels are recorded.

The KN-COSMXTR-B is user-friendly, equipped with a voice alarm feature that announces the type of danger detected, whether smoke or carbon monoxide. This vocal alert system is crucial, particularly for those who may struggle to recognize beeping sounds during stressful situations. Additionally, the alarm incorporates a test/reset button, making it easy to check functionality and silence the alarm when necessary.

Another notable aspect of the Kidde KN-COSMXTR-B is its battery backup. The device operates on a 9V battery, ensuring continued functionality even during power outages, which is essential for safety. Moreover, the unit is designed with a sleek and compact profile that blends seamlessly with various home decors while being easy to install, either on the wall or ceiling.

In conclusion, the Kidde KN-COSMXTR-B is an exemplary addition to any home safety setup. Its combination of dual-sensor technology, digital display, voice alerts, and battery backup empowers homeowners with reliable monitoring and peace of mind. Investing in this alarm means prioritizing safety against potentially life-threatening situations, making it a must-have for any household.
Top Page Image Contents