Kidde KN-COSMXTR-B manual Testing the Alarm

Page 18

Operating and Installation Instructions

Step 3: Testing the Alarm

The test button has four purposes. It tests the unit’s elec- tronics, resets the alarm, activates the Hush® feature, and activates the peak level memory.

CAUTION: Due to the loudness (85 decibels) of the alarm, always stand an arms length away from the unit when testing.

•To test: Press and release the test/reset button and a series of beeps will sound, followed by the message “Fire! Fire!”, then another two series of beeps and the message “Warning! Carbon Monoxide”, followed by 4 additional short beeps.

•Reset: If the Smoke/CO Alarm is sounding a CO alarm, pressing the test/reset button will silence the alarm. If the CO condition that caused the alert continues, the alarm will reactivate. Reactivation times depend on the amount of CO present. See page 21.

•Hush®: If the Smoke/CO Alarm is sounding a Smoke alarm, pressing the test/reset button will temporarily silence the alarm. If the smoke level continues to build, the alarm will reactivate. See Step 4: Hush® Control Feature.

•Peak Level Memory: If the green LED is blinking once every 16 seconds, the unit has detected a hazardous condition. If the unit has detected a CO level of 100 PPM or greater, pushing the Test/Reset button will result in a voice message “Caution, carbon monoxide previous- ly detected”. Peak level also happens if the unit detects smoke and then comes out of alarm. However, there is no voice message if the unit is in peak level due to smoke. When the Test/Reset button is pushed, the unit exhibits a normal PTT if in peak level due to smoke.

Weekly testing is required! If at anytime it does not per- form as described, verify the three batteries are installed correctly and that they don’t need replacing. Clean dust and other buildup off the unit. If it still doesn’t operate properly call the Consumer Hotline at 1-800-880-6788.

16

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Smoke Carbon Monoxide Alarm Table of Contents Introduction Alarm Sounder Product ViewLight Emitting Diode Battery Placement Battery Chamber BackFeatures Features Smoke Alarm Features Smoke AlarmCarbon Monoxide Alarm Features Carbon Monoxide CO AlarmOperating and Installation Instructions Installing BatteriesInstallation Instructions Recommended Installation LocationsSloped Ceiling Installation Mobile Homes Where Not to Installfor use in ordinary indoor locations How to Install Diagram D Tamper Resist Feature Figure aTesting the Alarm Hush Control Feature Peak Level MemoryWhat To Do When The Alarm Sounds Never Ignore the Sound of the AlarmWhat To Do When The Alarm Sounds After following steps 1-3, if your alarm reactivates Actuation of your CO AlarmIf alarm signal sounds Operate the test/reset button Never restart the source of a CO problem until it hasAlarm Response Time Been fixed. Never Ignore the AlarmBattery Replacement Alarm ReplacementGeneral CO Information General MaintenanceCarbon Monoxide Safety Information Possible SourcesCO Safety Tips Symptoms of CO PoisoningFire Safety Information Escape PlanFire Prevention Industry Safety Standards California State Fire MarshallConsumer Product Safety Commission NRCWarranty and Service Information Five Year Limited WarrantyWarranty and Service Information Questions or for More Information

KN-COSMXTR-B specifications

The Kidde KN-COSMXTR-B is a state-of-the-art combination carbon monoxide and smoke alarm designed to provide comprehensive safety for residential spaces. As an essential component of modern home safety systems, this device incorporates advanced technologies to ensure effective monitoring and alerts in case of hazardous conditions.

One of the standout features of the KN-COSMXTR-B is its dual-sensor technology, which combines both ionization and photoelectric sensing capabilities. Ionization sensors are particularly effective at detecting fast-flaming fires, making them ideal for kitchens or areas where cooking occurs. On the other hand, the photoelectric sensor excels at identifying slow-smoldering fires, often caused by burning materials. By integrating both types of sensors, the Kidde KN-COSMXTR-B offers enhanced detection reliability, significantly reducing the chances of false alarms while ensuring timely alerts during emergencies.

Another key characteristic of this alarm is its digital display, which provides real-time information about the levels of carbon monoxide present in the environment. This feature allows users to monitor CO levels accurately, understanding things beyond just standard alarm triggers. The device also includes a peak level memory that stores the highest CO reading, enabling homeowners to take necessary actions if elevated levels are recorded.

The KN-COSMXTR-B is user-friendly, equipped with a voice alarm feature that announces the type of danger detected, whether smoke or carbon monoxide. This vocal alert system is crucial, particularly for those who may struggle to recognize beeping sounds during stressful situations. Additionally, the alarm incorporates a test/reset button, making it easy to check functionality and silence the alarm when necessary.

Another notable aspect of the Kidde KN-COSMXTR-B is its battery backup. The device operates on a 9V battery, ensuring continued functionality even during power outages, which is essential for safety. Moreover, the unit is designed with a sleek and compact profile that blends seamlessly with various home decors while being easy to install, either on the wall or ceiling.

In conclusion, the Kidde KN-COSMXTR-B is an exemplary addition to any home safety setup. Its combination of dual-sensor technology, digital display, voice alerts, and battery backup empowers homeowners with reliable monitoring and peace of mind. Investing in this alarm means prioritizing safety against potentially life-threatening situations, making it a must-have for any household.
Top Page Image Contents