General Information, Operation, Installation

IPGSM-4GC Commercial Fire Communicator – Installation and Setup Guide

General Information

The IPGSM-4GC Commercial Fire Communicator (henceforth referred to as IPGSM-4GC) includes everything you need to upgrade a commercial fire system that previously reported by POTS to a system that uses the Internet as its primary reporting path, and uses a GSM cellular reporting path as a backup. In addition, the communicator’s power module (PowerBoost1) monitors and reports AC power loss, and low battery conditions.

NOTE: When programmed for an IP, or GSM, or IP & GSM reporting path, this product functions as an ACTIVE communication system.

Package Contents

∙ Red Fire Cabinet and Back Plate	∙ Antenna and Mounting Adapter	∙ Mounting Rails (for above)
∙ Cam Lock with Key	∙ PowerBoost1	∙ Hardware Bag
∙ Dialer Capture Module	∙ Battery harness/fuse (# 100-02415)	∙ Transformer, 18VAC
∙ Communicator	∙ Ferrite Filter	(# 1451-UL9)
∙ 50 ohm cable assembly (for antenna)	∙ LED Display board

Compatible Fire Panels

The IPGSM-4GC is compatible with all ULC Listed Fire Panels that use the Contact ID communication format, as described in the SIA DC-05 Standard, and have the model 659EN Line Fault Monitor installed.

After completing the field installation, verify communications with the central station is successful by sending several events. Also, get confirmation that these events were received.

IMPORTANT: For a fire panel that has more than 9 active zones (or partitions), the first 9 zones are reported to the central station uniquely. Beyond 9 zones, only the 2nd digit of the zone is reported along with a leading zero (example partition 14 is reported as 04). The installer must inform the central station of this condition.

Operation

The IPGSM-4GC replaces the fire panel's POTS communications path. When an event occurs, the fire panel goes off- hook to dial the central station. The IPGSM-4GC detects the off-hook condition and provides the fire panel with a dial tone. When the fire panel detects the dial tone, it begins dialing the central station. The IPGSM-4GC considers the three second period after dialing as the number dialing has been completed. After the dialing is completed, the Dialer Capture Module returns a handshake to the fire panel.

The fire panel then sends the contact ID reports to the IPGSM-4GC, which in turn sends a kiss-off after the report is successfully received from the fire panel. Within the IPGSM-4GC, the Dialer Capture Module sends the contact ID reports over the ECP bus to the Communicator. When all the reports are sent, the fire panel goes on-hook. The IPGSM-4GC then transmits the messages to the central station (either over the internet or the GSM network).

Installation

ULC Compliance

This product is compliant with CAN/ULC-S559 (Equipment for Fire Signal Receiving Centers and Systems). To meet this specification ensure the following:

∙IPGSM-4GC must be installed in accordance with Canadian Electrical Code, Part 1.

∙IPFSM-4GC must be used with compatible Fire Panels that have the 659EN Line Fault Monitor installed.

∙IPGSM-4GC must be mounted in the same room and within 20 feet of the fire panel.

∙The Telco line wiring and the Power Transformer wiring must be routed through conduit.

∙IPGSM-4GC, and all equipment used for the IP connection (such as the router, hub, modem, etc.) shall be listed, must be powered from an un-switched branch circuit, and be provided with appropriate standby power.

∙IPGSM-4GC must use a 7AH battery (not supplied) to provide 24-hour backup capability.

–1 –

IPGSM-4GC specifications

The Honeywell IPGSM-4GC is an advanced cellular communicator designed for security applications, providing reliable communication for alarm systems. This device enhances the ability of security systems to transmit signals to monitoring centers, ensuring that alarms are promptly addressed. With the increasing reliance on cellular technology, the IPGSM-4GC stands out as an essential tool for both residential and commercial security solutions.

One of the main features of the IPGSM-4GC is its dual-path communication capability. It can transmit signals via both Ethernet and cellular networks, providing redundancy that enhances reliability. In the event of an internet outage, the device seamlessly switches to cellular communication, ensuring that the alarm system remains operational at all times. This dual-path feature is particularly valuable in critical security applications where continuous communication is necessary.

The IPGSM-4GC also supports 4G LTE technology, which offers faster response times and improved signal quality compared to previous generation communicators. This technology enables the device to communicate with monitoring stations more efficiently, ensuring that alarm signals are sent and received quickly. Additionally, with 4G LTE being the current standard, the IPGSM-4GC is designed to remain relevant as older technologies are phased out.

Security is further enhanced by the robust encryption protocols employed by the IPGSM-4GC. The device uses advanced AES encryption, protecting sensitive data transmitted over cellular networks from potential interception or unauthorized access. This feature is crucial for users looking to maintain a high level of security in their alarm systems.

Installation and integration of the IPGSM-4GC are simplified thanks to its compatibility with a wide range of Honeywell alarm panels. The device utilizes a straightforward setup process, making it accessible for both professional installers and DIY enthusiasts. The modular design allows for easy updates and maintenance, ensuring longevity in performance.

In summary, the Honeywell IPGSM-4GC is a cutting-edge solution that combines dual-path communication, 4G LTE technology, and advanced encryption to provide a reliable and secure cellular communication option for alarm systems. With its ease of installation and compatibility with various Honeywell panels, it serves as a vital component for modern security solutions, meeting the demands of today’s connected world.