BRK electronic SC6120B Regulatory Information for Smoke Alarms, Agency Placement Recommendations

Page 26

Why is this important? Because you need to be warned of a potential CO problem while you can still react in time. In many reported cases of CO exposure, victims may be aware that they are not feeling well, but become disoriented and can no longer react well enough to exit the building or get help. Also, young children and pets may be the first affected.

The average healthy adult might not feel any symp- toms when the CO Alarm sounds. However, people with cardiac or respiratory problems, infants, unborn babies, pregnant mothers, or elderly people can be more quickly and severely affected by CO. If you experience even mild symptoms of CO poisoning, consult your doctor immediately!

CHAPTER 8: REGULATORY INFORMATION FOR SMOKE ALARMS

AGENCY PLACEMENT RECOMMENDATIONS

NFPA 72 (National Fire Code)

Smoke alarms shall be installed in each separate sleeping room, outside each sleeping area in the immediate vicinity of the bedrooms and on each additional story of the family living unit, including basements and excluding crawl spaces and unfin- ished attics.

In new construction, alarms shall be so arranged that operation of any one alarm shall cause the operation of all alarms within the dwelling.

Smoke Detection-Are More Smoke Alarms Desirable? The required number of smoke alarms might not provide reliable early warning protection for those areas separated by a door from the areas protected by the required smoke alarms. For this reason, it is recommended that the householder consider the use of additional smoke alarms for those areas for increased protection. The additional areas include the basement, bedrooms, dining room, furnace room, utility room, and hallways not protected by the required smoke alarms. The installation of smoke alarms in kitchens, attics (finished or unfinished), or garages is not normally recommended, as these locations occasionally experience conditions that can result in improper operation.

California State Fire Marshall (CSFM)

Early warning detection is best achieved by the installa- tion of fire detection equipment in all rooms and areas of the household as follows: A Smoke Alarm installed in each separate sleeping area (in the vicinity, but outside bedrooms), and heat or smoke alarms in the living rooms, dining rooms, bedrooms, kitchens, hallways, finished attics, furnace rooms, closets, utility and storage rooms, basements, and attached garages.

This equipment should be installed in accordance with NFPA (National Fire Protection Association) 72 and

101.National Fire Protection Association, One Batterymarch Park, Quincy, MA 02269-9101.

Additional local building and regulatory codes may apply in your area. Always check compliance requirements before beginning any installation.

Specific requirements for smoke alarm installation vary from state to state and from region to region. Check with your local Fire Department for current require- ments in your area. If you install AC or AC/DC units, it is recommended they be interconnected for added protection.

24

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Smoke Alarm Basic FeaturesCO Alarm Model SC6120B-USER’S ManualTable of Contents IntroductionBasic safety information Specifications Alarm SpecificationsCarbon Monoxide Alarm HOW Your SMOKE/CO Alarm Works Cover of Your SMOKE/CO Alarm Recommended Placement InstallationWhere to Install this Alarm Installing Smoke/CO Alarms in Mobile Homes KEYAvoiding Dead AIR Spaces Where not to Install this AlarmDo not locate this Smoke/CO Alarm Important Installation Parts Locking FeaturesTo Lock the Battery Compartment To Unlock the Battery CompartmentTo Unlock the Mounting Bracket Unlock the Battery CompartmentTo Lock the Mounting Bracket Tuck the White/Gray Stripe wire inside HOW to Install this AlarmTo install this unit, follow these steps Parts Of This UnitInterconnecting Multiple Alarms Interconnecting Multiple AlarmsInstalling a Single Stand-Alone Alarm Smoke Alarms Activate the Battery BACK-UP If the CO Alarm Sounds If Your SMOKE/CO Alarm SoundsWhat to do FIRST-IDENTIFY the Type of Alarm What to do if Carbon Monoxide is DetectedResponding to AN Alarm What to do if Smoke is DetectedWhen the CO Alarm is Silenced Using the Silence FeatureWhen the Smoke Alarm is Silenced LOW Battery Silence FeatureLatching Alarm Indicator KEYIf the Smoke/CO Alarm does not test properly Testing and MaintenanceWeekly Testing Regular Maintenance Choosing a Replacement BatteryProtecting Your Family From CO PoisoningProtecting Your Family Follow safety rules, and prevent hazardous situationsFrom Fire Finding the Source CO After AN Alarm What is CO?Symptoms of CO Poisoning What YOU Need to Know about COUL2034 Required Alarm Points Regulatory Information for CO AlarmsWhat Levels of CO Cause AN ALARM? Nfpa 72 National Fire Code Regulatory Information for Smoke AlarmsAgency Placement Recommendations California State Fire Marshall CsfmHotels/Motels Special Compliance ConsiderationsInstitutions Warehouses/Commercial BuildingsDifferent Types of Smoke Alarms Troubleshooting Guide Understanding the Light and Horn Patterns Condition LED Red or Green Lights HornGeneral Limitations of this Alarm Limited Warranty How to Obtain Warranty Service

SC6120B specifications

The BRK electronic SC6120B is a state-of-the-art combination smoke and carbon monoxide (CO) detector designed to provide optimal protection for homes and workplaces. This innovative device is engineered to enhance safety by detecting both smoke from fires and the presence of carbon monoxide, which is often referred to as the "silent killer" due to its odorless and colorless nature.

One of the standout features of the SC6120B is its Voice Alarm system, which emits distinct voice alerts to inform users whether smoke or CO is detected. This audio notification is crucial in emergency situations, as it allows individuals to respond quickly and appropriately. The device also includes a loud, 85-decibel alarm that further enhances alertness in the event of a danger.

The SC6120B utilizes advanced sensing technology to improve detection accuracy. It is equipped with a photoelectric smoke sensor that is known for its rapid response to smoldering fires, which produce smoke without a significant flame. This type of sensor is particularly effective for detecting slow-burning fires, such as those that begin with electrical equipment or household materials. Additionally, the SC6120B has an electrochemical sensor for CO detection, ensuring that it can identify elevated levels of carbon monoxide swiftly.

This unit is also designed for user convenience and reliability. It features a one-button test/hush function that allows users to easily test the unit's functionality or silence false alarms caused by cooking smoke or steam. The SC6120B has a low battery indicator that alerts users when it's time to replace the batteries, ensuring that the device remains operational at all times.

Another remarkable characteristic of the SC6120B is its compact and modern design, making it suitable for various environments, including bedrooms, hallways, and living rooms. It is easy to install, with a battery-operated option that eliminates the need for hardwiring, thus providing flexibility in placement.

In summary, the BRK electronic SC6120B combines innovative features, user-friendly technology, and effective safety detection into one reliable unit. Its dual function of smoke and CO detection, along with its loud alarms and voice notifications, make it an essential device for safeguarding life and property from the dangers of fire and carbon monoxide.
Top Page Image Contents