BRK electronic SC6120B user manual Activate the Battery BACK-UP

Page 15

Interconnecting Multiple Alarms (continued)...

7.Test each Alarm. Press and hold the test button until the unit alarms.

When testing a series of interconnected units you must test each unit individually. Make sure all units alarm when each one is tested.

NOTE: When power is applied, unit(s) may alarm momentarily.

If any unit in the series does not alarm, TURN OFF POWER and recheck connections. If it does not alarm when you restore power, replace it immediately.

ACTIVATE THE BATTERY BACK-UP

Activate the battery back-up by removing the “Pull to Activate Battery Back-Up” tab. You do not need to open the battery compartment and reposition the battery during installation.

Once you remove the battery tab, test the battery back-up. Press and hold the Test/Silence button on the cover until the alarm sounds. Turn on AC power as soon as possible to conserve battery.

Image 15

Contents Model SC6120B-USER’S Manual Basic FeaturesCO Alarm Smoke AlarmIntroduction Table of ContentsBasic safety information Alarm Specifications Carbon Monoxide AlarmSpecifications HOW Your SMOKE/CO Alarm Works Cover of Your SMOKE/CO Alarm Installation Where to Install this AlarmRecommended Placement KEY Installing Smoke/CO Alarms in Mobile HomesWhere not to Install this Alarm Do not locate this Smoke/CO AlarmAvoiding Dead AIR Spaces Locking Features Important Installation PartsTo Unlock the Battery Compartment To Lock the Battery CompartmentUnlock the Battery Compartment To Lock the Mounting BracketTo Unlock the Mounting Bracket Parts Of This Unit HOW to Install this AlarmTo install this unit, follow these steps Tuck the White/Gray Stripe wire insideInterconnecting Multiple Alarms Installing a Single Stand-Alone AlarmInterconnecting Multiple Alarms Smoke Alarms Activate the Battery BACK-UP What to do if Carbon Monoxide is Detected If Your SMOKE/CO Alarm SoundsWhat to do FIRST-IDENTIFY the Type of Alarm If the CO Alarm SoundsWhat to do if Smoke is Detected Responding to AN AlarmLOW Battery Silence Feature Using the Silence FeatureWhen the Smoke Alarm is Silenced When the CO Alarm is SilencedKEY Latching Alarm IndicatorTesting and Maintenance Weekly TestingIf the Smoke/CO Alarm does not test properly Choosing a Replacement Battery Regular MaintenanceFrom CO Poisoning Protecting Your FamilyFollow safety rules, and prevent hazardous situations From FireProtecting Your Family What YOU Need to Know about CO What is CO?Symptoms of CO Poisoning Finding the Source CO After AN AlarmRegulatory Information for CO Alarms What Levels of CO Cause AN ALARM?UL2034 Required Alarm Points California State Fire Marshall Csfm Regulatory Information for Smoke AlarmsAgency Placement Recommendations Nfpa 72 National Fire CodeWarehouses/Commercial Buildings Special Compliance ConsiderationsInstitutions Hotels/MotelsDifferent Types of Smoke Alarms Troubleshooting Guide Condition LED Red or Green Lights Horn Understanding the Light and Horn PatternsGeneral Limitations of this Alarm How to Obtain Warranty Service Limited Warranty

SC6120B specifications

The BRK electronic SC6120B is a state-of-the-art combination smoke and carbon monoxide (CO) detector designed to provide optimal protection for homes and workplaces. This innovative device is engineered to enhance safety by detecting both smoke from fires and the presence of carbon monoxide, which is often referred to as the "silent killer" due to its odorless and colorless nature.

One of the standout features of the SC6120B is its Voice Alarm system, which emits distinct voice alerts to inform users whether smoke or CO is detected. This audio notification is crucial in emergency situations, as it allows individuals to respond quickly and appropriately. The device also includes a loud, 85-decibel alarm that further enhances alertness in the event of a danger.

The SC6120B utilizes advanced sensing technology to improve detection accuracy. It is equipped with a photoelectric smoke sensor that is known for its rapid response to smoldering fires, which produce smoke without a significant flame. This type of sensor is particularly effective for detecting slow-burning fires, such as those that begin with electrical equipment or household materials. Additionally, the SC6120B has an electrochemical sensor for CO detection, ensuring that it can identify elevated levels of carbon monoxide swiftly.

This unit is also designed for user convenience and reliability. It features a one-button test/hush function that allows users to easily test the unit's functionality or silence false alarms caused by cooking smoke or steam. The SC6120B has a low battery indicator that alerts users when it's time to replace the batteries, ensuring that the device remains operational at all times.

Another remarkable characteristic of the SC6120B is its compact and modern design, making it suitable for various environments, including bedrooms, hallways, and living rooms. It is easy to install, with a battery-operated option that eliminates the need for hardwiring, thus providing flexibility in placement.

In summary, the BRK electronic SC6120B combines innovative features, user-friendly technology, and effective safety detection into one reliable unit. Its dual function of smoke and CO detection, along with its loud alarms and voice notifications, make it an essential device for safeguarding life and property from the dangers of fire and carbon monoxide.