DMP Electronics XR2400F manual About the Display Events Section, User Code Change Event Displays

Page 18

About the Display Events Section

This section of the user’s guide shows the User's Guide Display Events items for the Fire Command Center and Remote Fire Command

User Code Change Event Displays

This displays any addition, deletion, or change to a user code.

Center displays. While in the Display Events function, use the COMMAND and ARROW keys to go forward or backward through the list of events.

Zone Event Displays

Display

A DD 11: 41A 10 / 17 US:19 BY US:12

Description

User 19 added by user 12 at 11:41 AM. Press the Select key under either user (US:) number for the user name.

This section displays alarms, troubles, and other events that could occur on your protection zones. Some of the Zone and Event types listed here are not applicable to the XR2400F. Please disregard any displays that are not discussed in this User’s Guide.

User Code Event Types - There are 3 event types you may see here:

ADD - User added DEL - User deleted

CHG - User code or authority level has been changed.

Supervisory Event Displays

Display

Description

This displays the date and time of an automatic test report.

A LR 10: 23P 10/17

OFFICE SMOKE

An alarm occurred at 10:23 PM on Oct. 17. Press any SELECT key to see the zone number and zone type.

Display

MSG 11: 58P 10 / 17

AUTO RECALL

Description

The test report was sent to the central station at the date and time shown.

Zone Type - There are 7 possible zone types you may see here.

FIRE - Fire

PANC - Panic

BURG - Burglary

EMRG - Emergency

SUPV - Supervisory

 

System Monitor Event Displays

This displays any problems with the system's AC power, battery, or phone line(s) or any opening of a tampered panel box.

AUX1 - Auxiliary 1

AUX2 - Auxiliary 2

Event Types - There are 7 event types you may see here:

ALR - AlarmTBL - Trouble RST - Restore

LOW - Low battery MIS - Missing wireless transmitter

FLT - Zone Fault SVC - Service smoke detector

Display

TBL 11:41A 10/17

POW ER

Description

An AC failure occurred on Oct. 17. Press the SELECT key under 10/17 for the time the failure occurred.

14

User Menu

Image 18 Contents
Fire Command Center Silencing an Alarm Table of Contents Users GuideEmergency Evacuation Plans About Your Addressable Fire Alarm Control Panel Fire Command CenterUser Menu Fire Command Center Remote Fire Command Center User Options MenuFour Function Keys Special Fire Command Center Displays Special Fire Command Center TonesFire Command Center User Menu Alarm Silence Sensor ResetTurning the Outputs On and Off Outputs On OffZone Status Checking the Zone StatusSystem Status Using the System Test FunctionUsing the Test function key System TestUser Code Authority Levels User Codes125 34812 User Code Level 9 onlyProgramming Custom User Codes Adding User CodesChanging User Codes Ambush CodesDeleting User Codes User # DeletedUser Code Level 8 and above Setting the Date and TimeSetting the System’s Date and Time Time DAY Date is displayedUsing the Display Events Display EventsZone Event Displays About the Display Events SectionUser Code Change Event Displays Supervisory Event DisplaysFire Drill Service RequestUsing the Drill function key Starting a Fire DrillVoice Module LT-0560 12/00