Ei Electronics Ei261ENRC, Ei261DENRC manual Getting Your CO Alarm Serviced, Five Year Guarantee

Page 27

B16132-R0-261ENRC-UC-ENG 7/11/07 11:52 AM Page 27

10. GETTING YOUR CO ALARM SERVICED

If your CO Alarm fails to work after you have carefully read all the instructions, checked the unit has been installed correctly, and is receiving AC power, return it for repair or replacement. (Do not attach to mounting plate as unit can give beeps or alarm if the Test/Hush button is pressed during shipping). It should be returned in a padded box to “Customer Assistance and Information” at the nearest address given on the back page. State the nature of the fault, where the CO Alarm was purchased, and the date of purchase.

11. FIVE YEAR GUARANTEE

Ei Electronics guarantees this Carbon Monoxide Alarm for five years from the date of purchase against any defects that are due to faulty materials or workmanship. This guarantee only applies to normal conditions of use and service, and does not include damage resulting from accident, neglect, misuse, unauthorised dismantling, or contamination howsoever caused. This guarantee excludes incidental and consequential damage. If this Carbon Monoxide Alarm should become defective within the guarantee period, it must be returned to the nearest address given on the back page, carefully packaged, with the problem clearly stated (see 9 “GETTING YOUR CO ALARM SERVICED”) along with proof of the date of purchase. We shall at our discretion repair or replace the faulty unit.

27

Image 27
Contents Mains Powered Carbon Monoxide Alarms B16132-R0-261ENRC-UC-ENG 7/11/07 1152 AM Contents Important Information What to do When the Alarm Sounds High levels of CO in a house can be caused by What is Carbon Monoxide ?Symptoms of Carbon Monoxide Poisoning Carbon Monoxide the Silent KillerTable a Effects of Carbon Monoxide Poisoning Inhalation Time approx and Symptoms DevelopedWhat Happens When Your CO Alarm Detects Carbon Monoxide ? CO Alarm Memory Never Ignore the AlarmAlarm Positioning Ideally a Carbon Monoxide CO Alarm should be InstalledUnsuitable Locations B16132-R0-261ENRC-UC-ENG 7/11/07 1152 AM B16132-R0-261ENRC-UC-ENG 7/11/07 1152 AM Location in room with a fuel burning appliance Location in rooms with Alarm Installation InstallationInstallation Procedure B16132-R0-261ENRC-UC-ENG 7/11/07 1152 AM Surface Wiring Interconnecting Testing Testing with Carbon Monoxide HOW to Distinguish Between CO Alarm & Smoke Alarm Warnings MaintenanceDo not paint the CO Alarm Sensor Module Replacement HOW to Disconnect and Remove the AlarmLimitations of CO Alarms HOW to Protect Your Family B16132-R0-261ENRC-UC-ENG 7/11/07 1152 AM Five Year Guarantee Getting Your CO Alarm ServicedTechnical Specifications B16132-R0-261ENRC-UC-ENG 7/11/07 1152 AM Troubleshooting Alarm does not Work When the Test Button is PressedAlarm Beeps and Amber Light Flashes Every 40 Seconds Test/Hush Button does not Silence Alarms Alarm Sounds for no Apparent ReasonCheck AccessoriesB16132-R0-261ENRC-UC-ENG 7/11/07 1152 AM Ei Electronics