B16132-R0-261ENRC-UC-ENG 7/11/07 11:52 AM Page 29
Initialisation Time | : 70 seconds. On power up red and amber lights flash momentarily to show |
| they are operational. |
Operating | : |
Temperature |
|
Humidity Range | : 15% to 95% R.H. |
Audible Alarm | : 85dB(A) minimum @ 3m |
Self Diagnostics | : Horn beep and amber fault light flashes every 40 seconds if a sensor fault is found. |
Tamperproof | : Screwdriver needed to release from mounting plate. Additionally a tamper- |
| proofing screw can be fitted to the mounting plate. |
Rechargeable | : Fully charged cells can power unit in standby for over 4 weeks and without |
Lithium Cells: | mains power, it can power the unit in alarm for over 2 hours. The unit beeps |
| every 40 seconds if cells are depleted. |
Interconnect | : Up to 12 Ei261ENRC/261DENRC CO Alarms can be interconnected, so |
| that when one senses CO, all alarm. Alternatively, up to 12 Ei261ENRC/ |
| Ei261DENRC CO Alarms and Ei161RC/Ei164RC/Ei166RC Smoke/Heat |
| Alarms can be interconnected provided that an Ei1529RC Remote Control |
| is used. |
Relay Module Ei128RBU | : This can be connected using the interconnect line. |
with Ei128COV (optional) |
|
29