B16350-R0-Ei2100 SERIES-U&C.qxd 18/9/08 3:46 PM Page 21
REMOVEABLE
TRUNKING DOOR FOR
Figure 4
4.If the mains wires are recessed, bring the wires through the rear hole in the mounting plate as shown in Figure 4.
If the mains wires are being brought along the surface:
(a)position the mounting plate so the cable trunking is as shown in Figure 4.
(b)the mounting plate has a removable section, take it out to interface directly with 25mm trunking as shown in Figure 5. If interfacing to 16mm trunking carefully cut around the marked section, leaving the top intact and replace the section. (If you are not using surface wiring, the removable section must be left in place for electrical safety reasons).
21