Ei Electronics Ei2110 manual Interconnecting Alarms

Page 23

B16350-R0-Ei2100 SERIES-U&C.qxd 18/9/08 3:46 PM Page 23

9.Connect the mains power to the alarm circuit. Check the green light on the front of the alarm is on.

10.Attach the ‘Smoke Alarm’ identification label provided to the distribution board to identify the alarm circuit.

11.Attach the ‘Mains Smoke / Heat Alarms’ label provided on or near the distribution board and write in date installed and the number of alarms on the circuit.

Ensure the alarm operates correctly - see “TESTING & MAINTAINING YOUR ALARM” section on page 8 of the USER INSTRUCTIONS.

5.2 Interconnecting Alarms

Note: A maximum of twelve Ei2110 Multi-Sensor Fire Alarms and/or Ei164RC Heat Alarms may be interconnected along with an Ei128R/Ei128RBU relay (see “ACCESSORIES” section on page 25). (Note the Multi-Sensor Fire Alarm Ei2110 can also be interconnected to Ei141/144/146/161RC/166RC Smoke/Heat Alarms if required). It can also be interconnected to Ei261ENRC/261DENRC Carbon Monoxide Alarms provided an Ei1529RC Remote Control Switch is incorporated in the system - see page 25. Make electrical connections as shown in Figure 6.

If you wish to connect more than twelve alarms contact your local distributor (see page 28 for details).

Systems using more than 3 or 4 alarms must be very carefully planned to ensure nuisance alarms are not excessive. e.g. from cooking fumes or steam. The following is suggested:

• A Remote Control Switch (model Ei1529RC) should be incorporated into the system

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Installer Instructions Contents Interconnect ALL Alarms Installation Guide Alarm Removal Increased Longevity and Ruggedness Reduced Nuisance AlarmsFaster Response to a wider range of fires Single Person Interconnect Test Replace Alarm IndicatorAlarm Memory Fire Risk Assessment Categories of System LD3 Minimum Protection LD2 Additional Protection LD1 Optimum Protection Alarm Type Selecting Alarm TypeImproved Audibility Grade D, E & F SystemsPositioning Alarms Locations To Avoid DON’T place Heat Alarms in any of the following areasInstallation B16350-R0-Ei2100 SERIES-U&C.qxd 18/9/08 346 PM Mounting & Wiring Alarms B16350-R0-Ei2100 SERIES-U&C.qxd 18/9/08 346 PM Removeable Trunking Door for B16350-R0-Ei2100 SERIES-U&C.qxd 18/9/08 346 PM Interconnecting Alarms B16350-R0-Ei2100 SERIES-U&C.qxd 18/9/08 346 PM Relay Module Ei128R Remote Control Switch Ei1529RCRadioLINK Base Ei168RC B16350-R0-Ei2100 SERIES-U&C.qxd 18/9/08 346 PM B16350 Rev0 Ei Electronics

Ei2110 specifications

The Ei Electronics Ei2110 is a highly regarded smoke alarm designed to provide reliable protection against the dangers of fire. Known for its advanced features and innovative technologies, the Ei2110 has become a popular choice for both residential and commercial applications.

One of the standout features of the Ei2110 is its advanced optical sensing technology. This technology detects smoke using a light source, making it highly effective in identifying smoldering fires that produce large smoke particles. This sensitivity increases the alarm's response time, providing earlier warnings compared to traditional ionization smoke detectors.

Another critical characteristic of the Ei2110 is its easy installation process. The smoke alarm is designed to be user-friendly, allowing homeowners and businesses to install it with minimal effort. Additionally, it comes with a built-in test button, enabling users to ensure that the alarm is functioning correctly at any time.

The Ei2110 is equipped with a long-life battery, featuring a sealed lithium battery that provides up to 10 years of continuous protection. This battery eliminates the need for frequent replacements, making it a low-maintenance option for users. Furthermore, the smoke alarm has a built-in hushing feature that allows users to silence false alarms temporarily, such as those caused by cooking fumes.

One of the most significant advancements in the Ei2110 is its interconnected capability. Multiple Ei2110 units can be linked together, so when one alarm detects smoke, all interconnected alarms will sound, providing a comprehensive early warning system throughout the premises. This feature is particularly beneficial in larger homes or commercial buildings, ensuring that all occupants are alerted promptly in the event of a fire.

The design of the Ei2110 also reflects modern aesthetics and functionality. Its sleek, unobtrusive design blends well with various interior styles, making it a suitable addition to any space. Additionally, the unit is designed to be tamper-proof, further enhancing its reliability and ensuring that it remains operational at all times.

In summary, the Ei Electronics Ei2110 smoke alarm combines advanced sensing technology, user-friendly installation, long-lasting battery life, and interconnected capabilities. Its thoughtful design and features make it a top choice for anyone looking to enhance their fire safety measures, ensuring peace of mind and a proactive approach to fire protection.
Top Page Image Contents