Bosch Appliances D720B, D720W manual Partially Turn On the Perimeter, To arm with Command

Page 24

Partially Turn On the Perimeter

￿I have this feature.

￿I do not have this feature.

￿This feature requires a passcode.

This function is used to turn on the perimeter of your building while selected portions of the perimeter remain turned off. Perimeter points that are not secure (faulted) when this function is entered are not included in the system. This function does not turn on the interior of your building. Entry/exit delays are provided with this arming command.

Application

Use this function in residential systems to turn on the front of your house while the interior and the rear perimeter doors are turned off, giving you freedom of movement between the house and patio.

In commercial systems, when you need access to the large overhead doors to receive deliveries, this function allows you to keep the rest of the building perimeter armed.

COMMAND 8

To arm with COMMAND 8:

1.Ensure the keypad is disarmed.

2.Decide which points are to be left disarmed. Fault the points (doors and windows) by leaving them open. The point(s) must remain open until after the exit delay time expires.

3.Press the [COMMAND] bar. The Command mode indicator light comes on.

4.Press the [8] key. The PERIMETER indicator light begins to flash, showing the system has begun exit delay time. When the exit delay expires, the PERIMETER indicator is continuously lit.

5.When performing a COMMAND 8, and no points are faulted, or the points return to normal before the exit delay time expires, the system is armed as in COMMAND 3.

6.To disarm your security system or cancel COMMAND 8, enter your personal passcode and press [ENT].

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents LED Keypads D720 Series User’s Guide Table of Contents Fire Safety Case of FireMaintenance and Service AC Power FailureIntroduction D720 Series KeypadKeypad Features Security System BasicsKeypad Turning the System On Arming Turning the System Off DisarmingFunction Keys Silencing an Alarm To Silence an alarmReporting to the Central Station Silenced until the point fault is corrected Keypad TonesTurn the Entire System On With Delays CommandArming with Command ApplicationTurn the Entire System On Without Delays Command 1Using Command Turn On the Perimeter With No Delays Turn On the Perimeter With Delays To use Command Silence the Trouble SounderCommand 4 1 & 4 To use Command 4 1 or Command 4Send Report Enable Remote Account Management Command 4To use Command 4 Walk Test To use Walk TestReset Sensors To reset detectorsCommand 5 Delete PasscodesTo delete passcodes Personal Passcode Change To change your personal passcode Fire Test To use Fire TestWatch Mode To engage Command Special AlertTo arm with Command Partially Turn On the PerimeterCommand Bypass a Point To use Bypass a PointCommand 0 Unbypass a PointTo Unbypass a Point Turning the System On With a Duress Passcode Passcode + 1, or +To arm with points faulted Force Arming the SystemSecurity System Glossary Security System Limitations
Top Page Image Contents