Bosch Appliances D720B, D720W manual Force Arming the System, To arm with points faulted

Page 29

Force Arming the System

￿I have this feature.

￿I do not have this feature.

If a protected door or window is open, you can have the option of force arming with that point faulted. Faulted points (opened doors or windows) that are force armed are not included in the system. The remaining points arm normally.

Your system might not offer force arming or it is restricted to specific points. Contact your security company for more information.

To arm with points faulted:

 

1.

Enter your personal passcode and press the [ENT] key, or enter

 

 

an arming command (COMMANDs 1, 2, or 3). The keypad emits

 

 

a buzz tone indicating a point is faulted.

 

2.

Press the [COMMAND] bar and then the [ENT] key. The system

 

 

now arms all points that are normal.

Note:

If the fault is restored (returned to normal) while arming, the point is

armed. If the fault is restored after arming, how your system is programmed determines whether or not the point is armed with the rest of the system.

￿ A faulted point is armed with the rest of the system if restored.

￿ A faulted point is not armed with the rest of the system if restored and is not be armed until I disarm the security system and re-enter an arming command.

I am allowed to have a maximum of ______ points faulted when force arming.

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents LED Keypads D720 Series User’s Guide Table of Contents Case of Fire Fire SafetyAC Power Failure Maintenance and ServiceIntroduction D720 Series KeypadSecurity System Basics Keypad FeaturesKeypad Function Keys Turning the System On ArmingTurning the System Off Disarming Reporting to the Central Station Silencing an AlarmTo Silence an alarm Keypad Tones Silenced until the point fault is correctedCommand Turn the Entire System On With DelaysArming with Command ApplicationUsing Command Turn the Entire System On Without DelaysCommand 1 Turn On the Perimeter With No Delays Turn On the Perimeter With Delays Silence the Trouble Sounder To use CommandSend Report Command 4 1 & 4To use Command 4 1 or Command 4 To use Command 4 Enable Remote Account ManagementCommand 4 To use Walk Test Walk TestTo reset detectors Reset SensorsTo delete passcodes Command 5Delete Passcodes To change your personal passcode Personal Passcode ChangeTo use Fire Test Fire TestWatch Mode Special Alert To engage CommandPartially Turn On the Perimeter To arm with CommandCommand To use Bypass a Point Bypass a PointTo Unbypass a Point Command 0Unbypass a Point Passcode + 1, or + Turning the System On With a Duress PasscodeForce Arming the System To arm with points faultedSecurity System Glossary Security System Limitations
Top Page Image Contents