Introduction
Your security system helps to secure life, property, and investments against fire, theft, and bodily harm. The keypad is an arming station that offers a variety of features. Function, versatility, and ease of operation make the keypad the ideal system for the home or office.
With custom programming, the keypad is tailored to meet your individual needs. The Command mode allows you to perform a variety of functions with maximum simplicity - only the touch of two or three keys is required to control almost every feature on the keypad. Three function keys allow common commands to be performed with the touch of just one key.
The keypad puts the control of your security system right at your fingertips.
Maintenance and Service
The keypad requires very little maintenance; however, the system should be tested weekly to detect service needs early. A test schedule and maintenance program is arranged with your alarm company. If a change in operation is noticed during normal use or testing, call for service as soon as possible. Do not attempt to repair the control panel, arming stations, or detectors yourself.
Call _________________________________________ Before Testing
The security system is connected to this telephone number:
__________________________________________________________
The security control panel is connected to the phone jack located:
__________________________________________________________
AC Power Failure
If your keypad indicates AC power has failed, and you have power in the remainder of your premises, there could be a problem with the electrical transformer or circuit breaker supplying power to your security control panel. First, check to be sure the transformer is securely plugged into the electrical outlet. If it appears to be damaged in any way, do not attempt to repair it. Call your security company for service.
Transformer location: _________________________________________
If the transformer is plugged in, check the circuit breaker supplying power to the outlet. If the breaker is tripped, reset it. If it trips again, the overload condition must be corrected.
Circuit breaker location: _______________________________________
The D720 Series Keypad
The keypad is an illuminated digital arming station that is the keypad for your entire security system. The keypad does much more than just arm and disarm your security system; it can initiate several system commands. A system status display panel keeps you informed of security conditions, as well as storing alarm information for future reference. It also indicates various security system conditions such as your system’s armed status, protective point status, power supply status, and Command mode status. A
4