Bosch Appliances FPA-1000 manual Ordering Information

5 FPA‑1000 Analog Addressable Fire Panels

•	Connections:	Pluggable terminal blocks for AUX,
		Option Bus, SLC, NAC, Main Board
		Relays
•	Wire Gauge:	12 AWG to 18 AWG (0.75 mm2 to
		3.25 mm2)
Enclosure
•	Material:	Cold rolled steel, 19 gauge (1.2 mm)
•	Color:	Red
Dimensions
• Enclosure (W x H x		14.5 in. x 4.3 in. x 22.7 in.
	D):	(36.8 cm x 10.9 cm x 57.7 cm)

•with trim ring (W x 17.5 in. x 25.6 in.(44.5 cm x 65.0 cm) D):

• Semi-flush	3.25 in. / 1.05 in. (8.25 cm / 2.7 cm)
mounted (H
recessed / H
flush):
Weight (enclosure):	18.1 lb (8.32 kg)

Ordering Information

FPA-1000-V2 Analog Addressable Fire Panel Order number FPA-1000-V2

FPA-1000-LC FPA-1000 Analog Addressable Fire Panel less enclosure

Analog Addressable Fire Panel without enclosure

Order number FPA-1000-LC

FPA-1000-LT Analog Addressable Fire Panel less trans- former

Analog Addressable Fire Panel without transformer for Latin America only

Order number FPA-1000-LT

Accessories

BATB-40 Battery Box

The BATB-40 Battery Box holds two dry or wet cell batteries. The box can be used with fire alarm systems or intrusion systems. It measures 21 in. x 20.75 in. x

7.25in. (53.3 cm x 52.7 cm x 18.4 cm). Order number BATB-40

BATB-80 Battery Box with Shelf

The BATB-80 Battery Box holds up to four dry or wet cell batteries. The box can be used with fire alarm systems or with intrusion systems. It measures

12.25in. x 20.75 in. x 7.25 in. (31.1 cm x 52.7 cm x

18.4cm) on the bottom and 9.2 in. x 20.75 in. x

7.25in. (23.2 cm x 52.7 cm x 7.25 cm) on the shelf. Order number BATB-80

BATB-SHELF Optional Battery Shelf

An optional battery shelf for the BATB-40. It allows two additional batteries to be placed in the battery box.

Order number BATB-SHELF

D5070 Analog Device Programmer

Programs address settings on EEPROM‑programmable analog devices

Order number D5070

D7030X LED Annunciator

Eight zone LEDs indicate alarm conditions.

Order number D7030X

D7030X‑S2 LED Annunciator

Two LEDs indicate supervisory conditions; six indicate alarm conditions.

Order number D7030X-S2

D7030X‑S8 LED Annunciator

All eight zone LEDs indicate supervisory conditions.

Order number D7030X-S8

D7032 Eight‑zone LED Annunciator Expander

Use with D7030X Series LED Annunciators

Order number D7032

D7035 Octal Relay Module

Provide eight Form C relay outputs (w/o enclosure) for the D7024, FPD-7024, or FPA‑1000 Fire Alarm Control Panels (FACP)

Order number D7035

D7035B Octal Relay Module with Enclosure

Provide eight Form C relay outputs (w/ enclosure) for the D7024, FPD-7024, or FPA‑1000 Fire Alarm Control Panels (FACP)

Order number D7035B

D7048 Octal Driver Module

Module and hardware

Order number D7048

D7048B Octal Driver Module with Fire Enclosure

Module, mounting plate, metal enclosure, and hardware

Order number D7048B

FAA‑325‑2.5 Sampling Tube (2.5 ft)

2.5ft (762 mm) long sample tube for use with the FAD‑325 and FAD‑325‑R Analog Duct Detectors Order number FAA-325-2.5

FAA‑325‑5 Sampling Tube (5 ft)

5 ft (1.52 m) long sample tube for use with the FAD‑325 and FAD‑325‑R Analog Duct Detectors

Order number FAA-325-5

FAA‑325‑10 Sampling Tube (10 ft)

10 ft (3.05 m) long sample tube for use with the FAD‑325 and FAD‑325‑R Analog Duct Detectors

Order number FAA-325-10

FAA‑325‑B4 4‑inch Analog Sensor Base

Is combined with analog addressable detectors that use the advanced digital communication protocol to provide early fire warning for life safety and property protection

Order number FAA-325-B4