Carbon monoxide detector

6 FPA‑1000 Analog Addressable Fire Panels

FAA‑325‑B6 6‑inch Analog Sensor Base

6‑inch (152.4 mm) base for FAH‑325, FAI‑325, and FAP‑325 sensors. US sales only!

Order number FAA-325-B6

FAA‑325‑B6S Analog Sounder Base

Contains an addressable sounder which provides an audible alarm in the immediate vicinity and only works in combination with one of the FAH‑325, FAI-325, or FAP‑325 series analog sensors

Order number FAA-325-B6S

FAA-440-B4 Analog Standard Base 4-inch

Order number FAA-440-B4

FAA-440-B4-ISO Analog Isolator Base 4-inchOrder number FAA-440-B4-ISO

FAA-440-B6 Analog Standard Base 6-inch

Order number FAA-440-B6

FAA-440-B6-ISO Analog Isolator Base 6-inchOrder number FAA-440-B6-ISO

FAD-325-DH Analog Duct Smoke Detector Replacement Head

Replacement detector for the FAD-325 and the

FAD‑325‑DH Analog Duct Smoke Detectors for use in heating, ventilation, and air conditioning systems

Order number FAD-325-DH

FAD‑325 Analog Duct Detector

Housing for use in heating, ventilation and air conditioning systems (HVAC) that comes with an FAD‑325‑DH Analog Duct Smoke Detector Replacement

Order number FAD-325

FAD‑325‑R Analog Duct Detector with Relay

Housing with two Form C alarm contacts for use in heating, ventilation and air conditioning systems (HVAC) that comes with an FAD‑325‑DH Analog Duct Smoke Detector Replacement. US sales only!

Order number FAD-325-R

FAH‑325 Analog Heat Detector

Used in indoor environments with high ambient temperatures such as kitchens, boiler rooms, or drying rooms; compatible with 127 addresses

Order number FAH-325

FAH-440 Analog Heat Detector

Use with FAA‑440 Series bases and FAP-1000 Analog Addressable Fire Panels to provide general property protection

Order number FAH-440

FAI‑325 Analog Ionization Smoke Detector

For early warning of trouble from superheated or flaming combustibles where outside RFI and other electrical interference is expected. US sales only!

Order number FAI-325

FAP-325-V2F Analog Photoelectric Smoke Detector Flat

Used to detect fast‑flaming fires and dense smoke typically given off by plastic, foam, paper, wood, and other materials that tend to smolder

Order number FAP-325-V2F

FAP-440 Analog Photoelectric Detector

Order number FAP-440

FAP-440-D Analog Dual-Photoelectric Detector Order number FAP-440-D

FAP-440-DT Analog Multisensor Detector Dual-Photo/ Heat

Order number FAP-440-DT

FAP-440-DTC Analog Multicriteria Detector Dual-Photo/ Heat/CO

Order number FAP-440-DTC

FAP-440-T Analog Multisensor Detector Photo/Heat Order number FAP-440-T

FAP-440-TC Analog Multicriteria Detector Photo/ Heat/CO

Order number FAP-440-TC

FCC‑380 Carbon Monoxide Detector (Macurco CM‑E1)

Order number FCC-380

FLM‑325‑2I4 Dual Input Monitor

Provides two independent contact monitoring circuits to monitor Normally Open (NO) or Normally Closed (NC) dry contact types of fire alarm devices

Order number FLM-325-2I4

FLM‑325‑N4 Supervised Output Module

Provides a supervised pole reversal output used for acoustic and optical signaling devices or to trigger a remote NAC power expander; compatible with 127 addresses

Order number FLM-325-N4

FLM-325-NA4 Supervised Output Module (Class A and B)

Can be wired for Class A or Class B circuits; compatible with 254 addresses

Order number FLM-325-NA4

FLM-325-NAI4 Supervised Output Module (Class A and B, with isolator)

Built-in short circuit isolator circuitry; can be wired for Class A or Class B circuits; compatible with 254 addresses

Order number FLM-325-NAI4

FLM‑325‑2R4 Dual Relay Module

Provides two independently-controlled Form C contacts for a variety of Normally Open and Normally Closed applications; compatible with 127 addresses

Order number FLM-325-2R4