Hearth and Home Technologies SILH30E-B owner manual Getting Started, Tools and Supplies Needed

Page 5

2Getting Started

A. Design and Installation Considerations

C. Inspect Heater and Components

CAUTION

Check building codes prior to installation.

Installation MUST comply with local, regional, state and national codes and regulations.

Consult insurance carrier, local building inspector, fire officials or authorities having jurisdiction about restrictions, installation inspection, and permits.

When planning a heater installation, it is necessary to deter- mine the following information before installing:

Where the heater is to be installed. See Sections 3 and 4.

Electrical wiring. See Section 4.

Framing and fi nishing details. See Sections 3 and 6.

Whether optional accessories—devices such as a fan, wall switch or remote control—are desired. See Section 10.

B. Tools and Supplies Needed

Before beginning the installation be sure the following tools and building supplies are available:

Reciprocating saw

Framing material

Pliers

Wall-fi nishing materials

Hammer

Gloves

Phillips screwdriver

Framing square

Flat blade screwdriver

Electric drill and bits

Plumb line

Safety glasses

Level

Tape measure

Surround

 

1/2-3/4 in. length, #6 or #8 self-drilling screws Misc. screws and nails

CAUTION

Sharp Edges

Wear protective gloves and safety glasses during installation.

WARNING

Fire Risk

Inspect heater and components for damage.

Damaged parts may impair safe operation.

Do NOT install damaged components.

Do NOT install incomplete components.

Do NOT install substitute components Report damaged parts to dealer.

Carefully remove the heater and components from the packaging.

Report to your dealer any parts damaged in shipment.

Read all the instructions before starting the installation. Follow these instructions carefully during the installation to ensure maximum safety and benefit.

CAUTION

Keep heater dry.

Mold or rust may cause odors.

Note: Minimum and maximum clearances must be maintained at all times. Illustrations throughout these instructions refl ect typical installations and are for design purposes only. Actual installation may vary slightly due to individual design preferences.

The illustrations and diagrams used throughout these installation instructions are not drawn to scale.

Heatilator • SILH30E-B4038-896 Rev C • 11/05

5

Image 5
Contents SILH30E-B Listing Label Information/Location Homeowner Reference InformationTable of Contents Certification Listing and Code ApprovalsImportant Instructions Not intended for use as a primary heat sourceTools and Supplies Needed Getting StartedSelecting Heater Location Framing and ClearancesClearances Electrocution RiskModel Framing the Heater Frame the HeaterAs a Fireplace InstallationShock Risk Shock Risk Fire RiskAs an Insert Pre-installation PreparationWiring RW RT Install other Optional Accessories AccessoriesInstall the Front Face Finishing Finishing ChecklistFinishing Material MantelThermostat Main Power SwitchOperating Instructions Troubleshooting Guide TroubleshootingAccess the Firebox Maintenance and ServiceClean the Firebox Compartment Clean the Back Acrylic PanelWhen cleaning glass door Maintenance Task ListReference Materials Heater DimensionsSST = Stainless Steel Trim Optional ComponentsPBT = Polished Brass Trim SILH30E-B Service PartsLog Assembly Hearth Assembly Ember BedThermostat Control Assembly # Description of PartLimited Warranty WarrantyContact Information

SILH30E-B specifications

Hearth and Home Technologies SILH30E-B is an innovative direct vent gas fireplace that combines modern aesthetics with advanced functionality, making it an ideal choice for homeowners who seek both beauty and efficiency. This stylish unit features a sleek design with a large glass front, allowing for an unobstructed view of the flames. The SILH30E-B effortlessly blends into various interior settings, from contemporary to traditional, enhancing the overall ambiance of any room.

One of the standout features of the SILH30E-B is its energy efficiency. This fireplace is designed to maximize heat output while minimizing energy consumption, making it an environmentally friendly choice for heating spaces. The direct vent technology allows the unit to draw air from the outside for combustion, ensuring that the indoor air quality remains unaffected while providing optimal heating performance. This system also eliminates the need for a traditional chimney, simplifying installation and maintenance.

The SILH30E-B boasts a range of customizable options. Homeowners can select from various media types, including glass and stones, to personalize the fireplace's appearance. Additionally, the adjustable flame height feature allows users to create the perfect ambiance, whether they prefer a cozy fire for intimate gatherings or a roaring flame to warm up the entire space. This unit also includes a programmable remote control, granting easy access to the fireplace's settings from anywhere in the room.

Safety is a top priority for Hearth and Home Technologies, and the SILH30E-B incorporates several safety features. The unit is equipped with an automatic shut-off system that activates in case of irregularities, ensuring peace of mind for users. The cool-to-the-touch glass front prevents accidental burns, making it a suitable option for homes with children or pets.

In terms of installation, the SILH30E-B is designed for versatility. It can be installed as a built-in unit or as a zero-clearance fireplace, accommodating various architectural layouts and personal preferences. Its high-quality construction materials and advanced technologies further contribute to its durability and longevity, assuring homeowners of a sound investment.

In summary, the Hearth and Home Technologies SILH30E-B symbolizes the perfect merger of style, efficiency, and safety. With its modern design, customizable features, and energy-efficient performance, it stands out as a leading option for those looking to enhance their living spaces with a reliable and beautiful fireplace solution.