Installation, Shock Risk | Hearth and Home Technologies SILH30E-B

4Installation

CAUTION

Sharp Edges

•Wear protective gloves and safety glasses during installation.

A. As a Fireplace

Select a suitable location that is not susceptible to moisture and is away from drapes, furniture and high trafﬁc areas.

Note: Follow all national and local electrical codes.

WARNING

Shock Risk

Improperly grounded outlets could cause electrical shock.

•Always use properly grounded, fused and polarized outlets.

•Always use ground fault protection where required by electrical code.

WARNING

Shock Risk

Fire Risk

Improperly protected power cords could cause electrical shock or ﬁ re.

•Do not pinch the cord or lay against a sharp object.

•Do not cover the cord with carpeting, throw rugs or runners.

•Secure and arrange cord to avoid a tripping hazard.

•Do not coil cord.

Wall Cabinet Kit, Corner Cabinet Kit or Custom Cabinet Installation

The Cabinet must provide access to the wall outlet.

•For ease of electrical hookup, you may wish to install the heater near an existing outlet. A 15 amp, 120 volt circuit is required. A dedicated circuit is preferred but not essential in all cases. A dedicated circuit will be required if, after installation, the circuit trips or fuse blows on a regular basis while the heater is operating. Additional heaters on the same circuit may exceed the current rating of the circuit breaker.

•If using a wall cabinet or corner cabinet, refer to the installation instructions supplied with the kit. For custom cabinets, frame and construct with the opening and depth dimensions listed in Figures 3.1 and 3.2.

•Before plugging the heater into the wall outlet, make sure all control switches are in the “OFF” position.

• Before ﬁnishing the cabinet, the heater must be set into the cabinet and the power cord routed to the electrical outlet. If the power cord does not reach the outlet, a No. 16-AWG minimum wire size extension cord rated for a minimum of 1875 watts may be used. Use minimum length and do not coil cord.

•To complete the heater installation, refer to Section 5.

Non-Cabinet or Chase Installation

•Follow recommended framing dimensions in Figures 3.1 and 3.2.

•Set the heater into the framed opening. Secure the heater in place using the nailing ﬂ anges on both sides of the heater and nail to the framing.

•To ﬁ nish out the heater, follow the instructions found in Section 6.

•To complete heater installation, see Section 5.

Heatilator • SILH30E-B • 4038-896 Rev C • 11/05

SILH30E-B specifications

Hearth and Home Technologies SILH30E-B is an innovative direct vent gas fireplace that combines modern aesthetics with advanced functionality, making it an ideal choice for homeowners who seek both beauty and efficiency. This stylish unit features a sleek design with a large glass front, allowing for an unobstructed view of the flames. The SILH30E-B effortlessly blends into various interior settings, from contemporary to traditional, enhancing the overall ambiance of any room.

One of the standout features of the SILH30E-B is its energy efficiency. This fireplace is designed to maximize heat output while minimizing energy consumption, making it an environmentally friendly choice for heating spaces. The direct vent technology allows the unit to draw air from the outside for combustion, ensuring that the indoor air quality remains unaffected while providing optimal heating performance. This system also eliminates the need for a traditional chimney, simplifying installation and maintenance.

The SILH30E-B boasts a range of customizable options. Homeowners can select from various media types, including glass and stones, to personalize the fireplace's appearance. Additionally, the adjustable flame height feature allows users to create the perfect ambiance, whether they prefer a cozy fire for intimate gatherings or a roaring flame to warm up the entire space. This unit also includes a programmable remote control, granting easy access to the fireplace's settings from anywhere in the room.

Safety is a top priority for Hearth and Home Technologies, and the SILH30E-B incorporates several safety features. The unit is equipped with an automatic shut-off system that activates in case of irregularities, ensuring peace of mind for users. The cool-to-the-touch glass front prevents accidental burns, making it a suitable option for homes with children or pets.

In terms of installation, the SILH30E-B is designed for versatility. It can be installed as a built-in unit or as a zero-clearance fireplace, accommodating various architectural layouts and personal preferences. Its high-quality construction materials and advanced technologies further contribute to its durability and longevity, assuring homeowners of a sound investment.

In summary, the Hearth and Home Technologies SILH30E-B symbolizes the perfect merger of style, efficiency, and safety. With its modern design, customizable features, and energy-efficient performance, it stands out as a leading option for those looking to enhance their living spaces with a reliable and beautiful fireplace solution.