Hearth and Home Technologies EL36 Series owner manual Wood Burning Fireplace, Operation

Page 1

Owner’s Manual

Installation and Operation

Models:

EL36 Series

EL42 Series

Wood Burning Fireplace

NOTICE

DO NOT DISCARD THIS MANUAL

• Important operating •	Read, understand	• Leave this manual with
a n d m a i n t e n a n c e	and follow these	party responsible for
instructions included.	instructions for safe	use and operation.
	i n s t a l l a t i o n a n d
	operation.

DO DISCARDNOT

WARNING

If the information in these instruc- tions is not followed exactly, a ﬁre may result causing property damage, personal injury, or death.

•Do not store or use gasoline or other ﬂam- mable vapors and liquids in the vicinity of this or any other appliance.

•Do not overﬁre. Overﬁring will void your warranty.

•Comply with all minimum clearances to combustibles as speciﬁed. Failure to comply may cause house ﬁre.

Installation and service of this ﬁreplace should be performed by qualiﬁed personnel. Hearth & Home Technologies suggests NFI certiﬁed or factory-trained professionals, or technicians supervised by an

NFI certiﬁed professional.

WARNING

HOT SURFACES!

Screen/mesh, glass doors and other surfaces are hot during operation AND cool down.

Hot screen/mesh and glass doors will cause burns.

•DO NOT touch screen/mesh or glass doors until cooled

•NEVER allow children to touch screen/mesh or glass doors

•Keep children away

•CAREFULLY SUPERVISE children in same room as ﬁreplace.

•Alert children and adults to hazards of high temperatures.

High temperatures may ignite clothing or other ﬂammable materials.

•Keep clothing, furniture, draperies and other ﬂammable materials away.

WARNING

Fire Risk

•For use with solid wood fuel or decorative gas appliance only.

•DO NOT install unvented gas logs.

Heatilator • EL36/EL42 • 4044-132 • Rev V • 11/08

1

Image 1

Contents Operation Wood Burning FireplaceHot screen/mesh and glass doors will cause burns Fire RiskGrate Listing Label Information/LocationNumber Installer Guide Table of ContentsUser Guide CONDITIONS, Exclusions & Limitation of Liability Warranty Hearth & Home Technologies Limited WarrantyHeatilator EL36/EL42 4044-132 Rev V 11/08 Appliance Certiﬁcation Listing and Code ApprovalsNon-Combustible Materials Combustible MaterialsYour Fireplace Operating InstructionsHot glass will cause burns Starting a Fire Seasoned WoodGrate FirescreenVented Gas Log Sets & Gas Log Lighters Glass DoorsOptional Components Clear SpaceWood Fuel Chimney Inspection/Cleaning Maintainance and ServiceDisposal of Ashes Creosote Formation and Need for RemovalCheck Firebox Refractory Glass CleaningInspect Grate Frequency As desiredStart Fire Problems Possible Cause Solution Troubleshooting GuideGetting Started Installer GuideDraft Design and Installation ConsiderationsNegative Pressure Frequently open doors Central heat outlets or returns Locating Fireplace & ChimneyFireplace System Requirements Tools and Supplies NeededInspect Fireplace and Components Framing & Clearances Mm all configurationsSelect Fireplace Location Clearances to Combustible Materials ClearancesSidewalls/Surrounds Fireplace Outside Model # Opening DimensionsFrame the Fireplace Things to Consider Installation of FireplacePosition the Fireplace Place Protective Metal Hearth StripsYES Ft min. from top of uppermost chimney section to air inletOutside Air Installation Install Outside Air KitMaintain minimum height of chimney above roof Chimney AssemblyHeight of Chimney Components Chimney RequirementsExample Using Offsets/ReturnsAssemble Chimney Sections Install Chimney Air KitInstalling the Ceiling Firestop Install Ceiling FirestopsPrepare Attic Insulation Shield Install Attic Insulation ShieldInstall Flashing Complete InstallationFollowing steps should be skipped if using a chase Cut out Hole in RoofFlat Roofs Chimney Termination RequirementsConstruct the Chase Chase InstallationsGas line holes and other openings should be caulked with Chase should be constructed in the manner of allInstall Chase Top Install Fireplace & ChimneyInstall as per Sections 7 ST375 Square Termination Cap Install Termination CapTCT375 Terra Cotta Cap TS345/TS345P Square Termination CapRadiation Shield ShroudsField Constructed Shrouds Open Top Shroud TR342 caps require radiation shieldRoofed Style Shroud radiation shield required Mailbox Style Shroud radiation shield requiredHearth Extension Finishing= 1/k x inches of thickness Refer to .2 for hearth extension insulation alternativesMinimum between Raised Hearth Extension FramingNoncombustible Finishing Materials Non-combustible SealantIn. Micore or equivilent insulation Finishing MaterialClearances to Mantels or other Combustibles above Fireplace Combustible MantelModel Outside Di- mensionsGas Log/Lighter Provision AccessoriesWood Burning Inserts Gas Code, Ansi Z223.1Reference Materials Fireplace Dimensions1676 mm 508 mm 13 mm 1321 mm 406 mmID4 Insulated Duct Mm i.d 1067 mm UD4 Uninsulated Duct Air Kit PartsCatalog # Chimney Components10-1/2 267 mm Effective Outside Height Diameter 10-1/2 121 mm 267 mm305 mm 27-3/8 24-5/8 695 mm 625 mm 305 mm 24-5/8 625 mm 787 mm10-7/8 276 mm Heatilator EL36/EL42 Service PartsRev V 11/08 EL42 Contact Information