Hearth and Home Technologies RHW-485H owner manual Operating Instructions, General Information

Page 27

9

Operating Instructions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WARNING

 

 

WARNING

 

Fire Risk

 

 

HOT! DO NOT TOUCH.

 

 

 

SEVERE BURNS MAY RESULT.

 

• Do not operate fireplace before

 

 

 

 

 

CLOTHING IGNITION MAY RESULT.

 

reading and understanding operating

 

 

Glass and other surfaces are hot during

 

instructions.

 

 

 

 

 

operation and cool down.

 

Failure to operate fireplace properly may

 

 

 

 

 

 

 

 

cause fire.

 

Keep children away.

 

 

 

 

 

 

• CAREFULLY SUPERVISE children in same room as

A. General Information

 

fireplace.

Alert children and adults to hazards of high

Fireplaces, as well as other woodburning appliances, have

 

temperatures.

been used safely for many years. It has been our experience

Do NOT operate with protective barriers removed.

that most problems are caused by improper installation and

Keep clothing, furniture, draperies and other

operation of the fireplace. Make certain that installation and

 

combustibles away.

operation of the fireplace system is in accordance with these

 

 

 

 

 

 

instructions.

 

 

 

 

WARNING

It is extremely important that the fire be supervised when-

 

ever the fireplace is in use. It is also recommended that an

 

Fire Risk

annual inspection be performed on the fireplace system to

 

 

• For use with solid wood fuel or decorative gas

determine if the flue system needs to be cleaned, or as in

 

 

appliance only.

the case of any appliance, if minor repairs are required to

 

 

• Do not install unvented gas logs.

maintain the system in top operating condition.

 

 

 

 

 

 

 

Damper Control

CloseOpen

Outside

Air Kit

Control

Open Close

Figure 9.1 General Operating Parts

Heat & Glo • RHW-485 • 33221 Rev O • 08/06

27

Image 27
Contents Fire Risk Models RHW-485, RHW-485H Woodburning FireplaceListing Label Information/Location GrateNumber Table of Contents Listing and Code Approvals Appliance CertificationNot intended for use as a primary heat source Asphyxiation Risk Design and Installation ConsiderationsGetting Started Negative PressureMarginal Location Typical Fireplace System Typical Fireplace SystemTools and Supplies Needed Inspect Fireplace and ComponentsFire Risk Explosion Risk Selecting Fireplace Location Framing and ClearancesClearances to Combustible Materials ClearancesFrame the Fireplace Sidewalls/SurroundsChimney Requirements Construct the ChaseRisk of Smoke Spillage Installation of FireplaceInstall the Outside Air Kit Sharp Edges Asphyxiation RiskFt min. from top of uppermost chimney section to air inlet Level the Fireplace Secure the FireplacePosition the Fireplace Place the Protective Metal Hearth StripsChimney Assembly Height of Chimney Components Degree SL306 SL312 SL318 SL324 SL336 SL348 Using Offsets/ReturnsAssemble the Chimney Sections Install the Ceiling FirestopsInstall the Attic Insulation Shield Double-check the Chimney AssemblySecure the Chimney Chimney Termination Complete the EnclosureInstall the Termination Cap Install the Chimney Air Kit required in CanadaChase Top Installing an ST375 Square Termination Cap Accessories Gas Log/Lighter ProvisionsGas Code, Ansi Z223.1 Hearth Extension FinishingCombustible Material Finishing MaterialMantel Glass DoorsGeneral Information Operating InstructionsFirescreen Outside AirClear Space Near the Fireplace Flue DamperMoisture GrateWood Fuel FirewoodStarting a Fire Understanding Vent Problems TroubleshootingCan’t get a good fire going. What am I doing wrong? Diagnostics and Problem SolvingDiagnostic Questions Solutionsfireplace burns the wood too fast. What can I do? Firebox Refractory Maintenance and Servicing the FireplaceChimney Inspection/Cleaning Disposal of AshesChimney Fire Maintenance Task ListWhen cleaning glass door CleanReference Materials Fireplace DimensionsCatalog # Description Fireplace ComponentsCatalog # Chimney Components14-1/2 1829 mm 10-7/8 276 mm 406 mm 508 mm 20 x Minimum Base Dimensions 28 X 28 with 32 X 32 with 23 XMinimum Base Dimensions 26.5 X 28 with 34 X 34 with TR442 TR442 / 444 TVThis page intentionally left blank RHW-485 Service PartsHerringbone Brick Refractory option available week 03/04 Description of Part RHW-485 RHW-485H QtyThis page intentionally left blank Limited Warranty Warranty For Heat & GLO FireplacesDo Discardnot Contact Information

RHW-485, RHW-485H specifications

Hearth and Home Technologies (HHT) is a leader in the manufacture of innovative and high-quality hearth products, and their RHW-485H and RHW-485 models are no exceptions. These wood-burning heaters are designed to provide efficient and effective heating solutions for residential spaces while offering an elegant aesthetic that complements various home decors.

One of the main features of the RHW-485H and RHW-485 is their impressive heating capacity. Both models are designed to heat areas up to 2,000 square feet efficiently, making them ideal for large living spaces or open-concept homes. This significant heating capability is made possible by advanced combustion technology that allows for a longer burn time, ensuring extended warmth throughout the night.

Another defining characteristic of these units is their clean-burning technology. HHT has incorporated a unique air wash system that enhances combustion efficiency and minimizes emissions. This ensures that homeowners can enjoy the beauty and comfort of a wood fire while adhering to environmental standards. Furthermore, these models have received certification from the EPA for meeting stringent guidelines, making them an excellent choice for those who are environmentally conscious.

In terms of design, the RHW-485H features an attractive cast iron door with a large viewing window. This allows for an unobstructed view of the mesmerizing flames and adds a touch of sophistication to any room. The RHW-485, while similar in heating efficiency, offers slightly different aesthetic options, giving homeowners the ability to choose a model that aligns with their personal style.

Both models come equipped with a robust refractory system that enhances heat retention and distribution. This technology ensures that heat is released evenly and efficiently, providing consistent warmth without the need for constant refueling. Additionally, they feature adjustable air controls that allow users to manage burn rates and heat output according to their preferences.

Another important aspect is the ease of installation and maintenance. The RHW-485H and RHW-485 have been designed with user-friendly features, including accessible clean-out ports that simplify ash removal. This reduces the hassle of routine care, allowing homeowners to enjoy their fireplace without extensive upkeep.

In conclusion, Hearth and Home Technologies’ RHW-485H and RHW-485 models are premium wood-burning heaters that combine efficiency, elegance, and environmental responsibility. They offer a perfect blend of modern technology and classic design, making them an excellent choice for discerning homeowners looking to enhance their living space with warmth and style.