Hearth and Home Technologies RHW-41 operating instructions Installation & Operating Instructions

Page 1

INSTALLATION & OPERATING

INSTRUCTIONS

RHW-41 & RHW-47

WOODBURNING FIREPLACE

Note: An arrow () found in the text and in the index signifies change in content.

WARNING!

Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to this manual. For assistance or additional information, consult a qualified installer, service agency or the gas supplier.

08/04

26022 Rev i

1

Image 1

Contents Installation & Operating Instructions Table of Contents Design and Installation Considerations Description of the Fireplace System Listings and Code ApprovalsFireplace Components System ComponentsOutside AIR KIT CAK4A Chimney ComponentsAS8 CAK4A Fireplace Locations and Space Requirements PRE-INSTALLATION PreparationFraming the Fireplace Framing the FireplaceSidewalls/Surrounds Chimney RequirementsOffset Chart Using Offsets and ReturnsNumber of Sections Required Chimney Height Requirements above roof linePosition the Fireplace Installation of FireplacePlace the Protective Metal Hearth Strips Level the FireplaceAssemble Chimney Sections Install Firestop SpacersAttic Insulation Shield Double-check the Chimney AssemblySecure the Chimney System Install the Outside Air Kit Install the Roof FlashingInstall the Chimney Air Kit required in Canada Mark the Exit Point of the RoofGas Log/Lighter Provisions Complete the EnclosureField Constructed Hearth Extension Hearth ExtensionFinishing Material Position the Hearth ExtensionMantel Glass DoorsMaterials Constructing a ChaseTermination Cap Chase TopInstalling an ST375 Square Termination Cap General Information Outside Air Operating InstructionsFlue Damper Firescreen GrateWood Fuel Starting a Fire Draft ProblemsRHW-41/RHW-47 Installation Instructions Chimney Cleaning Maintenance InstructionsDisposal of Ashes Creosote and SootHOMEOWNER’S Notes Index Warranty For HEAT-N-GLO Fireplaces