Hearth and Home Technologies T4200 Attic Insulation Shield, Double-check the Chimney Assembly

Page 15

T4200 FIREPLACE INSTALLATION INSTRUCTIONS

￿6. Attic Insulation Shield

An insulation shield should be installed when there is a possibility of insulation coming into contact with the factory built chimney system.

a.Bend the tabs at the top of the attic insulation shield inward. This will help keep the chimney section centered in the shield.

b.Position the shield over the vertical chimney section where it penetrates a firestop spacer.

c.Slide the shield down until it rests on the firestop spacer. The firestop spacer will support the insulation shield. See Figure 12.

Figure 12 - Installing an Insulation Shield

￿

WARNING! RISK OF FIRE.

Do not fill the space between the chimney sec- tion and the insulation shield with insulation.

7.Double-check the Chimney Assembly

Continue assembling the chimney sections up through the firestop spacers as needed. While doing so, be aware of the height and unsupported chimney length limitations that are given on page 11 under “Chimney Requirements”.

Check each section by pulling up slightly from the top to ensure proper engagement before installing the succeeding sections. If they have been connected correctly, they will not disengage when tested.

CAUTION:

Inner flue and outer liner sections cannot be disassembled once locked together. Plan ahead to ensure the proper installation height is achieved with the selected chimney compo- nents.

8.Secure the Chimney System

When offsets and returns are joined to straight pipe sections, they must be locked into position with the screws provided (outer only), using the predrilled holes. To prevent gravity from pulling the chimney sections apart, the returns and the chimney stabilizers have straps for securing these parts to joists or rafters. See Figure 13.

Note: You must provide support for the pipe dur- ing construction and check to be sure inadvertent loading has not dislodged the chimney section from the fireplace or at any chimney joint.

Figure 13 - Offset/Return with Stabilizer

WARNING!

When chimney sections exceeding six feet in length are installed between an offset and re- turn, structural support must be provided to re- duce off-center loading and prevent chimney sections from separating at the chimney joints.

WARNING!

Maintain a minimum of 2” air clearance to all parts of the chimney system at all times! Fail- ure to maintain this 2” air clearance will cause a structure fire.

12/03

35036 Rev E

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Installation & Operating Instructions Table of Contents Design and Installation Considerations Description of the Fireplace System Listings and Code ApprovalsFireplace Components Catalog # Description System ComponentsCatalog # Description Chimney ComponentsFirestop Spacer TR11T Fireplace Locations and Space Requirements PRE-INSTALLATION PreparationSidewalls/Surrounds Framing the FireplaceUsing Offsets and Returns Offset/Returns Offset ChartChimney Requirements Number of Sections Required Chimney Height Requirements above roof lineLevel the Fireplace Installation of FireplacePosition the Fireplace Place the Protective Metal Hearth StripsAssemble Chimney Sections Install Firestop SpacersDouble-check the Chimney Assembly Attic Insulation ShieldSecure the Chimney System Mark the Exit Point of the Roof Install the Roof FlashingInstall the Outside Air Kit Install the Chimney Air KitGas Log/Lighter Provisions Complete the EnclosureFactory Built Hearth Extension Hearth ExtensionGlass Doors Position the Hearth ExtensionFinishing Material MantelMaterials Constructing a ChaseTermination Cap Chase TopOperating Instructions General Information Outside AirFlue Damper Grate FirescreenWood Fuel Starting a Fire Draft ProblemsFlue Draft Creosote and Soot Maintenance InstructionsChimney Cleaning Disposal of AshesIndex Heatilator Woodburning Fireplace Limited WarrantyReplacement Parts Advantage How to Obtain Service

T4200 specifications

Hearth and Home Technologies T4200 is a remarkable addition to modern home heating solutions, designed to enhance comfort and efficiency while maintaining aesthetic appeal. With its advanced features and cutting-edge technologies, the T4200 offers homeowners a perfect balance of warmth, style, and environmental consciousness.

One of the standout features of the T4200 is its impressive heating capacity. With a BTU output capable of heating large spaces, this unit ensures that homes remain cozy even during the coldest months. The well-designed combustion system optimizes fuel usage, resulting in enhanced efficiency and reduced emissions, making it an environmentally friendly choice for homeowners.

The T4200 boasts a sleek and contemporary design, fitting seamlessly into various interior styles. Its large viewing window provides an unobstructed view of the flames, creating a captivating ambiance that traditional heating methods often lack. The unit can be customized with a range of options, including different trim styles and finishes, allowing homeowners to personalize their heating solution to match their décor.

Equipped with state-of-the-art technology, the T4200 features an advanced control system that allows users to easily manage heat output and flame intensity. Many models include a remote control and programmable thermostat, giving homeowners the convenience of adjusting settings from anywhere in the room. This level of control not only enhances comfort but also contributes to energy savings.

Safety is a top priority in the T4200's design. It incorporates built-in safety features such as automatic shut-off systems, which activate in the event of malfunctions. Additionally, the unit is constructed from durable materials designed to withstand high temperatures, ensuring longevity and reliability.

The T4200 is designed with versatility in mind. It can operate on various fuel types, including natural gas, propane, or wood, catering to the preferences of diverse customers. This flexibility further enhances its appeal as an all-around heating solution.

Overall, the Hearth and Home Technologies T4200 stands out as a leader in the home heating market. Its combination of high performance, innovative technology, and stylish design make it an ideal choice for those seeking efficient and attractive heating options. Homeowners can enjoy the warmth and beauty of this unit, knowing they have invested in a long-lasting and environmentally conscious heating solution.
Top Page Image Contents