Hearth and Home Technologies T4200 manual Framing the Fireplace, Sidewalls/Surrounds

Page 10

T4200 FIREPLACE INSTALLATION INSTRUCTIONS

2.Framing the Fireplace

The T4200 fireplace will fit a framed opening of 52” wide x 435/8” tall. The finished cavity depth must be no less than 27¾”.

Figure 5 shows a typical framing (using 2 x 4 lumber) of the fireplace, assuming combustible materials are used. All required clearances to combustibles around the fireplace must be adhered to. Any framing across the top of the fireplace must be above the level of the top standoffs. Chimney sections at any level require a 2” minimum air space clearance between the framing and chimney section.

CLEARANCES!

A minimum ¾” air clearance must be maintained at the back and sides of the fireplace assembly except at the nailing flange where the clearance is ½”.

Chimney sections at any level require a 2” minimum air space clearance between the framing and chimney section.

Figure 5 - Framing the Fireplace

WARNING!

Do not apply combustible finishing materials over any part of the black face of this fireplace or a structure fire may result. The black metal fireplace front may only be covered with noncombustible materials such as ce- ramic tile, brick, or stone. Do not cover or block any cooling air slots. Do not cover any portion of the opening to the fireplace that would prevent the installation of an authorized glass door.

3.Sidewalls/Surrounds

Adjacent combustible side walls must be located a minimum of 24” from the fireplace opening. See Figure 6. If you are using a decorative surround constructed of combustible material, it must be located within the shaded area defined in Figure 6. Short stub walls are also acceptable if they are contained within the shaded area.

Figure 6 - Sidewalls and Surrounds

10

35036 Rev E

12/03

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Installation & Operating Instructions Table of Contents Design and Installation Considerations Listings and Code Approvals Description of the Fireplace SystemSystem Components Fireplace Components Catalog # DescriptionChimney Components Catalog # DescriptionFirestop Spacer TR11T PRE-INSTALLATION Preparation Fireplace Locations and Space RequirementsFraming the Fireplace Sidewalls/SurroundsOffset/Returns Offset Chart Using Offsets and ReturnsChimney Requirements Chimney Height Requirements above roof line Number of Sections RequiredPlace the Protective Metal Hearth Strips Installation of FireplacePosition the Fireplace Level the FireplaceInstall Firestop Spacers Assemble Chimney SectionsAttic Insulation Shield Double-check the Chimney AssemblySecure the Chimney System Install the Chimney Air Kit Install the Roof FlashingInstall the Outside Air Kit Mark the Exit Point of the RoofComplete the Enclosure Gas Log/Lighter ProvisionsHearth Extension Factory Built Hearth ExtensionMantel Position the Hearth ExtensionFinishing Material Glass DoorsConstructing a Chase MaterialsChase Top Termination CapGeneral Information Outside Air Operating InstructionsFlue Damper Firescreen GrateWood Fuel Draft Problems Starting a FireFlue Draft Disposal of Ashes Maintenance InstructionsChimney Cleaning Creosote and SootIndex How to Obtain Service Limited WarrantyReplacement Parts Advantage Heatilator Woodburning Fireplace

T4200 specifications

Hearth and Home Technologies T4200 is a remarkable addition to modern home heating solutions, designed to enhance comfort and efficiency while maintaining aesthetic appeal. With its advanced features and cutting-edge technologies, the T4200 offers homeowners a perfect balance of warmth, style, and environmental consciousness.

One of the standout features of the T4200 is its impressive heating capacity. With a BTU output capable of heating large spaces, this unit ensures that homes remain cozy even during the coldest months. The well-designed combustion system optimizes fuel usage, resulting in enhanced efficiency and reduced emissions, making it an environmentally friendly choice for homeowners.

The T4200 boasts a sleek and contemporary design, fitting seamlessly into various interior styles. Its large viewing window provides an unobstructed view of the flames, creating a captivating ambiance that traditional heating methods often lack. The unit can be customized with a range of options, including different trim styles and finishes, allowing homeowners to personalize their heating solution to match their décor.

Equipped with state-of-the-art technology, the T4200 features an advanced control system that allows users to easily manage heat output and flame intensity. Many models include a remote control and programmable thermostat, giving homeowners the convenience of adjusting settings from anywhere in the room. This level of control not only enhances comfort but also contributes to energy savings.

Safety is a top priority in the T4200's design. It incorporates built-in safety features such as automatic shut-off systems, which activate in the event of malfunctions. Additionally, the unit is constructed from durable materials designed to withstand high temperatures, ensuring longevity and reliability.

The T4200 is designed with versatility in mind. It can operate on various fuel types, including natural gas, propane, or wood, catering to the preferences of diverse customers. This flexibility further enhances its appeal as an all-around heating solution.

Overall, the Hearth and Home Technologies T4200 stands out as a leader in the home heating market. Its combination of high performance, innovative technology, and stylish design make it an ideal choice for those seeking efficient and attractive heating options. Homeowners can enjoy the warmth and beauty of this unit, knowing they have invested in a long-lasting and environmentally conscious heating solution.
Top Page Image Contents