Hearth and Home Technologies T4200 manual Installation of Fireplace, Position the Fireplace

Page 13

T4200 FIREPLACE INSTALLATION INSTRUCTIONS

F. INSTALLATION OF FIREPLACE

WARNING!

Before starting, do the following:

1.Wear gloves and safety glasses for protection.

2.Keep hand tools in good condition. Sharpen cutting edges and make sure tool handles are secure.

3.Always maintain the minimum air space required to the enclosure to prevent fire.

1.Position the Fireplace

This fireplace may be placed on either a combustible or noncombustible continuous flat surface. Follow the instructions for framing on pages 9 and 10. Slide the fireplace into position. Be sure to provide the minimum air clearance at the sides and back of the fireplace assembly.

2.Place the Protective Metal Hearth Strips

Included with your fireplace you will find two metal hearth strips measuring approximately 28” x 4”. These strips are used to provide added protection where the fireplace and the hearth extension meet.

Slide each metal strip 2” under the front edge of the fireplace. The individual pieces must overlap each other by 1” minimum in the middle of the fireplace to provide continuous coverage of the floor. See Figure 9. These metal strips should extend from the front and sides of the fireplace opening by 2”.

3.Level the Fireplace

Level the fireplace side-to-side and front-to-back. Shim with noncombustible material, such as sheet metal, as necessary. Secure the fireplace (using the nailing flanges located on either side of the fireplace) to the vertical framing.

Figure 9 - Positioning the Metal Strips

Important: To ensure proper fit of the glass doors, check the fireplace opening for square. Measure diagonal distances of the opening to make sure they are equal. If they are not equal, continue to shim the fireplace until those diagonals are equal.

12/03

35036 Rev E

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Installation & Operating Instructions Table of Contents Design and Installation Considerations Description of the Fireplace System Listings and Code ApprovalsFireplace Components Catalog # Description System ComponentsCatalog # Description Chimney ComponentsFirestop Spacer TR11T Fireplace Locations and Space Requirements PRE-INSTALLATION PreparationSidewalls/Surrounds Framing the FireplaceOffset/Returns Offset Chart Using Offsets and ReturnsChimney Requirements Number of Sections Required Chimney Height Requirements above roof linePosition the Fireplace Installation of FireplacePlace the Protective Metal Hearth Strips Level the FireplaceAssemble Chimney Sections Install Firestop SpacersAttic Insulation Shield Double-check the Chimney AssemblySecure the Chimney System Install the Outside Air Kit Install the Roof FlashingInstall the Chimney Air Kit Mark the Exit Point of the RoofGas Log/Lighter Provisions Complete the EnclosureFactory Built Hearth Extension Hearth ExtensionFinishing Material Position the Hearth ExtensionMantel Glass DoorsMaterials Constructing a ChaseTermination Cap Chase TopGeneral Information Outside Air Operating InstructionsFlue Damper Firescreen GrateWood Fuel Starting a Fire Draft ProblemsFlue Draft Chimney Cleaning Maintenance InstructionsDisposal of Ashes Creosote and SootIndex Replacement Parts Advantage Limited WarrantyHow to Obtain Service Heatilator Woodburning Fireplace

T4200 specifications

Hearth and Home Technologies T4200 is a remarkable addition to modern home heating solutions, designed to enhance comfort and efficiency while maintaining aesthetic appeal. With its advanced features and cutting-edge technologies, the T4200 offers homeowners a perfect balance of warmth, style, and environmental consciousness.

One of the standout features of the T4200 is its impressive heating capacity. With a BTU output capable of heating large spaces, this unit ensures that homes remain cozy even during the coldest months. The well-designed combustion system optimizes fuel usage, resulting in enhanced efficiency and reduced emissions, making it an environmentally friendly choice for homeowners.

The T4200 boasts a sleek and contemporary design, fitting seamlessly into various interior styles. Its large viewing window provides an unobstructed view of the flames, creating a captivating ambiance that traditional heating methods often lack. The unit can be customized with a range of options, including different trim styles and finishes, allowing homeowners to personalize their heating solution to match their décor.

Equipped with state-of-the-art technology, the T4200 features an advanced control system that allows users to easily manage heat output and flame intensity. Many models include a remote control and programmable thermostat, giving homeowners the convenience of adjusting settings from anywhere in the room. This level of control not only enhances comfort but also contributes to energy savings.

Safety is a top priority in the T4200's design. It incorporates built-in safety features such as automatic shut-off systems, which activate in the event of malfunctions. Additionally, the unit is constructed from durable materials designed to withstand high temperatures, ensuring longevity and reliability.

The T4200 is designed with versatility in mind. It can operate on various fuel types, including natural gas, propane, or wood, catering to the preferences of diverse customers. This flexibility further enhances its appeal as an all-around heating solution.

Overall, the Hearth and Home Technologies T4200 stands out as a leader in the home heating market. Its combination of high performance, innovative technology, and stylish design make it an ideal choice for those seeking efficient and attractive heating options. Homeowners can enjoy the warmth and beauty of this unit, knowing they have invested in a long-lasting and environmentally conscious heating solution.
Top Page Image Contents