Position the Hearth Extension | Hearth and Home Technologies T4200

T4200 FIREPLACE INSTALLATION INSTRUCTIONS

18.Position the Hearth Extension

Position and secure the hearth extension over the protective metal strips that have been placed partially under the fireplace front. These strips should be protruding approximately 2” from under the fireplace front and 2” on both sides of the fireplace opening.

Seal the crack between the hearth extension and fireplace with a bead of noncombustible sealant. See Figure 19. Apply a noncombustible finishing material of your choice to the hearth extension.

Figure 19 - Position the Hearth Extension

19.Finishing Material

Do not install combustible materials over the black face of the fireplace! This poses a safety hazard and may start a fire. You may only use noncombustible material over the black face of the fireplace.

a.Combustible Material

Material which is made of or surfaced with wood, compressed paper, plant fibers, plastics, or any material capable of igniting and burning, whether flame proofed or not, plastered or unplastered.

b.Noncombustible Material

Material which will not ignite and burn. Such materials are those consisting entirely of steel, iron, brick, tile, concrete, slate, glass or plasters, or any combination thereof.

c.Noncombustible Sealant Material

Sealants which will not ignite and burn; General Electric RTV103 Black (or equivalent), Rutland, Inc. Fireplace Mortar #63 (or equivalent).

After completing the framing and applying the facing material (dry wall) over the framing, a ½” wide (maximum) bead of noncombustible sealant must be used to close off any gaps at the top and sides between the fireplace and facing to prevent cold air leaks.

Only noncombustible materials may be used to cover the black metal fireplace front.

20.Mantel

A combustible mantel may be positioned no lower than 12” above the top of the fireplace opening. The combustible mantel may have a maximum depth of 12”. Combustible trim pieces that project no more than 1½” from the face of the fireplace can be placed no closer than 6” from the top of the fireplace opening. Combustible trim must not cover the black metal surfaces of the fireplace. This mantel clearance is in accordance with Section 7-3.3.3 of ANSI/NFPA211.

21.Glass Doors

This fireplace has been tested and listed for use with doors as specified in Section “C. Fireplace System Components”. Please refer to the manual packed with each set of doors for installation instructions.

12/03

35036 Rev E

T4200 specifications

Hearth and Home Technologies T4200 is a remarkable addition to modern home heating solutions, designed to enhance comfort and efficiency while maintaining aesthetic appeal. With its advanced features and cutting-edge technologies, the T4200 offers homeowners a perfect balance of warmth, style, and environmental consciousness.

One of the standout features of the T4200 is its impressive heating capacity. With a BTU output capable of heating large spaces, this unit ensures that homes remain cozy even during the coldest months. The well-designed combustion system optimizes fuel usage, resulting in enhanced efficiency and reduced emissions, making it an environmentally friendly choice for homeowners.

The T4200 boasts a sleek and contemporary design, fitting seamlessly into various interior styles. Its large viewing window provides an unobstructed view of the flames, creating a captivating ambiance that traditional heating methods often lack. The unit can be customized with a range of options, including different trim styles and finishes, allowing homeowners to personalize their heating solution to match their décor.

Equipped with state-of-the-art technology, the T4200 features an advanced control system that allows users to easily manage heat output and flame intensity. Many models include a remote control and programmable thermostat, giving homeowners the convenience of adjusting settings from anywhere in the room. This level of control not only enhances comfort but also contributes to energy savings.

Safety is a top priority in the T4200's design. It incorporates built-in safety features such as automatic shut-off systems, which activate in the event of malfunctions. Additionally, the unit is constructed from durable materials designed to withstand high temperatures, ensuring longevity and reliability.

The T4200 is designed with versatility in mind. It can operate on various fuel types, including natural gas, propane, or wood, catering to the preferences of diverse customers. This flexibility further enhances its appeal as an all-around heating solution.

Overall, the Hearth and Home Technologies T4200 stands out as a leader in the home heating market. Its combination of high performance, innovative technology, and stylish design make it an ideal choice for those seeking efficient and attractive heating options. Homeowners can enjoy the warmth and beauty of this unit, knowing they have invested in a long-lasting and environmentally conscious heating solution.