Hearth and Home Technologies 6000TRS-CE manual Safety and Warning Information

Page 2

2

SAFETY AND WARNING INFORMATION

 

!

READ and UNDERSTAND all instructions carefully before starting the installation.

 

 

FAILURE TO FOLLOW these installation instructions may result in a possible fire

 

 

 

hazard and will void the warranty.

 

!

Prior to the first firing of the fireplace, READ the Using Your Fireplace section of the

 

Users Guide.

 

 

 

 

 

 

!

DO NOT USE this appliance if any part has been under water. Immediately CALL a

 

 

qualified service technician to inspect the unit and to replace any part of the control

 

 

 

system and any gas control which has been under water.

 

!

THIS UNIT IS NOT FOR USE WITH SOLID FUEL.

 

 

 

 

 

 

!

Installation and repair should be PERFORMED by a qualified service person. The

 

 

appliance and flue system should be INSPECTED before initial use and at least

 

 

 

annually by a professional service person.

 

!

Always KEEP the appliance clear and free from combustible materials, petrol, and

 

other flammable vapors and liquids.

 

 

 

 

 

 

!

NEVER OBSTRUCT the flow of combustion and ventilation air. Keep the front of the

 

 

appliance CLEAR of all obstacles and materials for servicing and proper operations.

 

!

Due to the high temperature, the appliance should be LOCATED out of traffic areas

 

and away from furniture and draperies. Clothing or flammable material SHOULD NOT

 

 

 

BE PLACED on or near the appliance.

 

 

 

 

 

 

!

Children and adults should be ALERTED to the hazards of high surface temperature

 

 

and should STAY AWAY to avoid burns or clothing ignition. Young children should be

 

 

 

CAREFULLY SUPERVISED when they are in the same room as the appliance.

 

!

These units MUST use one of the fluing systems described in the Installing the Fireplace

 

section of the Installers Guide. NO OTHER flue systems or components MAY BE USED.

 

 

 

 

 

 

 

 

!

This gas appliance and flue assembly MUST be vented directly to the outside and

 

MUST NEVER be attached to a chimney serving a separate solid fuel burning

 

 

 

appliance. Each gas appliance MUST USE a separate flue system. Common flue

 

 

 

systems are PROHIBITED.

 

!

INSPECT the external terminal cap on a regular basis to make sure that no debris is

 

interfering with the air flow.

 

 

 

 

 

 

!

The glass door assembly MUST be in place and sealed, and the trim door assembly

 

 

MUST be in place on the appliance before the unit can be placed into safe operation.

 

!

DO NOT OPERATE this appliance with the glass door removed, cracked, or broken.

 

Replacement of the glass door should be performed by a licensed or qualified service

 

 

 

person. DO NOT strike or slam the glass door.

 

 

 

 

 

 

!

The glass door assembly SHALL ONLY be replaced as a complete unit, as supplied

 

 

by the gas appliance manufacturer. NO SUBSTITUTE material may be used.

 

!

DO NOT USE abrasive cleaners on the glass door assembly. DO NOT ATTEMPT to

 

clean the glass door when it is hot.

 

 

 

 

 

!

Turn off the gas before servicing this appliance. It is recommended that a qualified

 

service technician perform an appliance check-up at the beginning of each heating

 

 

 

season.

 

!

Any safety screen or guard removed for servicing must be replaced before operating

 

this appliance.

 

 

 

 

 

!

This appliance is intended for use on a gas installation with a governed meter.

 

 

 

 

 

Image 2
Contents 0087 What to do if you smell gasSafety and Warning Information Installing the Fireplace Table of ContentsÎService Parts List Maintaining and Servicing Your Fireplace Troubleshooting6000TRS-CE NG Service Parts List 6000TRS-CEStanding Pilot Description Serial # Part NumberAppliance Certification Installation RegulationsApprovals and Regulations 6000TRS-CE Advantica Gas FireplaceANY Such Action MAY Possibly Cause a Fire Hazard Diagram of the 6000TRS-CE Installing the Fireplace Clearance RequirementsStep Flue System Approvals Identifying Flue ComponentsDVP90ST Straight up Vertical Flue Flue with One 90 Elbow Flue with Two 90 Elbows Flue with TWO 2 90 Elbows Flue with three 90 elbows Flue with three 90 elbows Venting Out the Top Flue Installing Flue ComponentsVenting Out the Rear Flue Install Support Brackets On the TOP of the heaterInstall Firestops For Horizontal Runs Firestops are Required onFlue Pipe & Firestop Flue Termination Arrow is Pointing UP DVP Termination Cap This also pertains to vertical flue systems installed Alcove Applications Step Gas Control System Gas Control SystemStep Gas Supply Line Do not USE AN Open Flame to Check for GAS LeaksStep Wiring Fireplace RequirementsStanding Pilot Ignition Wiring Diagram Step FinishingInstalling the Trim Installing the Ceramic RefractoryLOG Placement Page GlassAssembly Placing the Ember MaterialDouble-check for faulty components Step Before Lighting Fireplace After InstallationReview safety warnings and cautions Double-check for gas leaksFireplace Maintenance Maintaining Servicing Your FireplaceBurner Flame Patterns Standing Pilot Troubleshooting Trouble- shootingCheck the thermopile with a millivolt Placed in this Opening

6000TRS-CE specifications

Hearth and Home Technologies is renowned for producing innovative and efficient heating solutions, and their 6000TRS-CE model exemplifies this commitment to quality and performance. The 6000TRS-CE is a contemporary gas fireplace that combines aesthetic appeal with cutting-edge technology, making it a popular choice for modern homes.

One of the standout features of the 6000TRS-CE is its expansive viewing area. The large glass front allows for maximum visibility of the flames, creating a captivating focal point in any room. This model is designed with a clean, modern aesthetic, ensuring that it seamlessly fits into various interior designs.

In terms of efficiency, the 6000TRS-CE is equipped with a powerful heat exchanger that ensures optimal warmth while minimizing energy consumption. This not only makes it environmentally friendly but also results in lower utility bills for homeowners. The fireplace boasts a high efficiency rating, which underscores its prowess in providing comfortable heating without excessive fuel usage.

The technology integrated into the 6000TRS-CE allows for precise temperature control. With an advanced electronic control system, users can easily adjust settings to their desired levels, making it convenient to maintain the perfect ambiance. The model also features a remote control option, allowing homeowners to operate the fireplace from the comfort of their seating area.

Additionally, the 6000TRS-CE incorporates a realistic flame presentation, achieved through its innovative burner system. This system not only enhances the visual appeal of the flames but also contributes to a more realistic ambiance, emulating the look and feel of a traditional wood-burning fireplace without the hassle of logs and ashes.

The 6000TRS-CE is designed with safety and convenience in mind. It includes a glass enclosure that remains cool to the touch, offering peace of mind for households with children or pets. Furthermore, the fireplace is equipped with safety shut-offs and feature-rich options that enhance user experience while prioritizing safety.

Overall, the Hearth and Home Technologies 6000TRS-CE model combines modern design with efficient performance, ensuring it stands out in the realm of gas fireplaces. With its impressive features, ease of use, and focus on safety, the 6000TRS-CE is an excellent addition to any home looking to enhance its heating solution while maintaining a stylish appearance.