Hearth and Home Technologies 6000TRS-CE manual Flue Pipe & Firestop

Page 23

10" (25.4 cm)

INTERIOR

WALL SHIELD

12" (30.5 cm)

FIGURE 18. Flue Pipe & Firestop

For Vertical Runs - One firestop is REQUIRED at the hole in each ceiling through which the flue passes.

To install firestops for vertical runs that pass through ceilings:

•Position a plumb bob directly over the center of the ver- tical flue component.

•Mark the ceiling to establish the centerpoint of the flue.

•Drill a hole or drive a nail through this center point.

•Check the floor above for any obstructions, such as wiring or plumbing runs.

•Reposition the heater and flue system, if necessary, to accommodate the ceiling joists and/or obstructions.

•Cut a 25.4cm X 30.5cm hole through the ceiling, using the firestop pipe opening as a guide.

•Frame the hole with framing lumber the same size as the ceiling joists.

	10" (25.4 cm)	10” (25.4 cm)
		10” (25.4 cm)
		CHIMNEY
		HOLE
	NEW	EXISTING CEILING
	NEW	JOISTS
	FRAMING	JOISTS
	FRAMING
	MEMBERS
	CEILING

FIGURE 19. Hole and New Framing Members

Image 23

Contents What to do if you smell gas 0087Safety and Warning Information Maintaining and Servicing Your Fireplace Troubleshooting Table of ContentsÎService Parts List Installing the Fireplace6000TRS-CE 6000TRS-CE NG Service Parts ListDescription Serial # Part Number Standing Pilot6000TRS-CE Advantica Gas Fireplace Installation RegulationsApprovals and Regulations Appliance CertificationANY Such Action MAY Possibly Cause a Fire Hazard Diagram of the 6000TRS-CE Clearance Requirements Installing the FireplaceStep Identifying Flue Components Flue System ApprovalsDVP90ST Straight up Vertical Flue Flue with One 90 Elbow Flue with Two 90 Elbows Flue with TWO 2 90 Elbows Flue with three 90 elbows Flue with three 90 elbows Venting Out the Top Flue Installing Flue ComponentsVenting Out the Rear Flue On the TOP of the heater Install Support BracketsFor Horizontal Runs Firestops are Required on Install FirestopsFlue Pipe & Firestop Flue Termination Arrow is Pointing UP DVP Termination Cap This also pertains to vertical flue systems installed Alcove Applications Gas Control System Step Gas Control SystemDo not USE AN Open Flame to Check for GAS Leaks Step Gas Supply LineRequirements Step Wiring FireplaceStep Finishing Standing Pilot Ignition Wiring DiagramInstalling the Ceramic Refractory Installing the TrimLOG Placement Page Placing the Ember Material GlassAssemblyDouble-check for gas leaks Step Before Lighting Fireplace After InstallationReview safety warnings and cautions Double-check for faulty componentsMaintaining Servicing Your Fireplace Fireplace MaintenanceBurner Flame Patterns Trouble- shooting Standing Pilot TroubleshootingCheck the thermopile with a millivolt Placed in this Opening

6000TRS-CE specifications

Hearth and Home Technologies is renowned for producing innovative and efficient heating solutions, and their 6000TRS-CE model exemplifies this commitment to quality and performance. The 6000TRS-CE is a contemporary gas fireplace that combines aesthetic appeal with cutting-edge technology, making it a popular choice for modern homes.

One of the standout features of the 6000TRS-CE is its expansive viewing area. The large glass front allows for maximum visibility of the flames, creating a captivating focal point in any room. This model is designed with a clean, modern aesthetic, ensuring that it seamlessly fits into various interior designs.

In terms of efficiency, the 6000TRS-CE is equipped with a powerful heat exchanger that ensures optimal warmth while minimizing energy consumption. This not only makes it environmentally friendly but also results in lower utility bills for homeowners. The fireplace boasts a high efficiency rating, which underscores its prowess in providing comfortable heating without excessive fuel usage.

The technology integrated into the 6000TRS-CE allows for precise temperature control. With an advanced electronic control system, users can easily adjust settings to their desired levels, making it convenient to maintain the perfect ambiance. The model also features a remote control option, allowing homeowners to operate the fireplace from the comfort of their seating area.

Additionally, the 6000TRS-CE incorporates a realistic flame presentation, achieved through its innovative burner system. This system not only enhances the visual appeal of the flames but also contributes to a more realistic ambiance, emulating the look and feel of a traditional wood-burning fireplace without the hassle of logs and ashes.

The 6000TRS-CE is designed with safety and convenience in mind. It includes a glass enclosure that remains cool to the touch, offering peace of mind for households with children or pets. Furthermore, the fireplace is equipped with safety shut-offs and feature-rich options that enhance user experience while prioritizing safety.

Overall, the Hearth and Home Technologies 6000TRS-CE model combines modern design with efficient performance, ensuring it stands out in the realm of gas fireplaces. With its impressive features, ease of use, and focus on safety, the 6000TRS-CE is an excellent addition to any home looking to enhance its heating solution while maintaining a stylish appearance.