Hearth and Home Technologies 6000TRS-CE manual Install Firestops

Page 22

For Vertical Runs - The flue system must be supported every 240 cm above the heater flue outlet by wall brackets.

To install support brackets for vertical runs:

•Attach wall brackets to the flue pipe and secure the wall bracket to the framing members with nails or screws.

WALL BRACKET

WALL STUD

243.8 cm

FLUE

OUTLET

2.54 cm MIN.

Figure 17. Installing Support Brackets

3. Install Firestops

For Horizontal Runs - Firestops are REQUIRED on

both sides of a combustible wall through which the flue passes.

To install firestops (heat shield) for horizontal runs that pass through either interior or exterior walls:

•Cut a 25.4 cm X 30.5 cm hole through the wall.

•Position the firestops on both sides of the hole pre- viously cut and secure the firestops with nails or screws.

•The pipe opening of the firestops MUST BE placed towards the bottom of the firestop.

•Continue the flue run through the firestop.

Image 22

Contents 0087 What to do if you smell gasSafety and Warning Information Installing the Fireplace Table of ContentsÎService Parts List Maintaining and Servicing Your Fireplace Troubleshooting6000TRS-CE NG Service Parts List 6000TRS-CEStanding Pilot Description Serial # Part NumberAppliance Certification Installation RegulationsApprovals and Regulations 6000TRS-CE Advantica Gas FireplaceANY Such Action MAY Possibly Cause a Fire Hazard Diagram of the 6000TRS-CE Installing the Fireplace Clearance RequirementsStep Flue System Approvals Identifying Flue ComponentsDVP90ST Straight up Vertical Flue Flue with One 90 Elbow Flue with Two 90 Elbows Flue with TWO 2 90 Elbows Flue with three 90 elbows Flue with three 90 elbows Venting Out the Rear Flue Installing Flue ComponentsVenting Out the Top Flue Install Support Brackets On the TOP of the heaterInstall Firestops For Horizontal Runs Firestops are Required onFlue Pipe & Firestop Flue Termination Arrow is Pointing UP DVP Termination Cap This also pertains to vertical flue systems installed Alcove Applications Step Gas Control System Gas Control SystemStep Gas Supply Line Do not USE AN Open Flame to Check for GAS LeaksStep Wiring Fireplace RequirementsStanding Pilot Ignition Wiring Diagram Step FinishingInstalling the Trim Installing the Ceramic RefractoryLOG Placement Page GlassAssembly Placing the Ember MaterialDouble-check for faulty components Step Before Lighting Fireplace After InstallationReview safety warnings and cautions Double-check for gas leaksFireplace Maintenance Maintaining Servicing Your FireplaceBurner Flame Patterns Standing Pilot Troubleshooting Trouble- shootingCheck the thermopile with a millivolt Placed in this Opening

6000TRS-CE specifications

Hearth and Home Technologies is renowned for producing innovative and efficient heating solutions, and their 6000TRS-CE model exemplifies this commitment to quality and performance. The 6000TRS-CE is a contemporary gas fireplace that combines aesthetic appeal with cutting-edge technology, making it a popular choice for modern homes.

One of the standout features of the 6000TRS-CE is its expansive viewing area. The large glass front allows for maximum visibility of the flames, creating a captivating focal point in any room. This model is designed with a clean, modern aesthetic, ensuring that it seamlessly fits into various interior designs.

In terms of efficiency, the 6000TRS-CE is equipped with a powerful heat exchanger that ensures optimal warmth while minimizing energy consumption. This not only makes it environmentally friendly but also results in lower utility bills for homeowners. The fireplace boasts a high efficiency rating, which underscores its prowess in providing comfortable heating without excessive fuel usage.

The technology integrated into the 6000TRS-CE allows for precise temperature control. With an advanced electronic control system, users can easily adjust settings to their desired levels, making it convenient to maintain the perfect ambiance. The model also features a remote control option, allowing homeowners to operate the fireplace from the comfort of their seating area.

Additionally, the 6000TRS-CE incorporates a realistic flame presentation, achieved through its innovative burner system. This system not only enhances the visual appeal of the flames but also contributes to a more realistic ambiance, emulating the look and feel of a traditional wood-burning fireplace without the hassle of logs and ashes.

The 6000TRS-CE is designed with safety and convenience in mind. It includes a glass enclosure that remains cool to the touch, offering peace of mind for households with children or pets. Furthermore, the fireplace is equipped with safety shut-offs and feature-rich options that enhance user experience while prioritizing safety.

Overall, the Hearth and Home Technologies 6000TRS-CE model combines modern design with efficient performance, ensuring it stands out in the realm of gas fireplaces. With its impressive features, ease of use, and focus on safety, the 6000TRS-CE is an excellent addition to any home looking to enhance its heating solution while maintaining a stylish appearance.